By TheMrJahn on May 04, 2019

14  430  5

New AMAXinno motors in size 2207.5 with 2500kv are great, lightweight XBEE-SR 220mm frame, powerful T-Motor F55A Pro esc, reliable Matek F722-Mini flight controller - this drone is a beast! All components was chosen to handle up to 6s batteries without any issues, so to be sure that 6s batteries will do no harm decided to install bigger additional 50v 2200muf capacitor. Total weight with props is about 330 grams, so power to weight ratio is really mad!

Flight videos:


Part List


XBEE-SR Hybrid 220mm FPV Racing Kit

Flight Controller

Matek Systems F722-Mini Flight Controller OSD Dual Gyro/Acc 32M Flash 5V/2A BEC for RC Drone


T-motor F55A Pro 4 IN 1 55A 3-6S Blheli_32 32Bit Brushless ESC DSHOT600 for RC Drone


4 x Motor 2207.5-2500KV (2-6S) AMAXinno
See Site

FPV Camera

RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone (297 builds)

FPV Transmitter

TBS Unify Pro 5G8 V3 (SMA) (150 builds)


Lumenier AXII Stubby 5.8GHz Antenna (RHCP) (228 builds)


TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver (310 builds)

Misc Parts

5 Pcs AMASS XT60+ Male Plug Connector 14AWG 10cm Power Cable Wire (10 builds)

Misc Parts

Original Airbot Cable Wire Sets A SH1.0-SH1.0 DIY Kit (2 builds)

Misc Parts

10Pcs 50V 2200UF 16 X 25mm Electrolytic Capacitor (2 builds)

Misc Parts

Alarm Module w/ LED For NAZE32 F3 Flight Controller RC Drone FPV Racing Multi Rotor (10 builds)

Misc Parts

Smallest Mini Dual GLONASS+GPS BN-180 Micro Double GPS Antenna Module UART TTL For CC3D F3 RC Drone Airplane (29 builds)

Misc Parts

1PC Realacc 45 Degree Antenna Adapter Connector SMA RP-SMA For RX5808 Fatshark Goggles RC Drone (10 builds)

Misc Parts

4 PCS 4-6S Mini LED Light Board Red Green for RC Drone FPV Racing Frame Kit (4 builds)
See Site
Show stores (5)


Sign in to comment

doc   May 04, 2019  

Holly crap batman! 2500kv motors on 6s? Thats like 63,000 rpm theoreticly and at 330 grams it's got to a beast. I want to see a speed run.

TheMrJahn   May 04, 2019 

I will add a link to flight video after testing this drone. Big question is to find propellers that won’t blow up in the air during a flight at a full speed...

doc   May 05, 2019 

Low pitch bi-blades? Thinking about it, I don't even know what i'd run. A lot of low pitch props are thin and would flatten out at that speed. I have a friend that built a Catalyst Merica running 2400kv 6s using a bolt v2, the bolt burned up on the third run.
He started out full throttle, it was fun to watch while it lasted but i'd start about 60% and put my amp draw right in the middle of my osd. Good luck, can't wait for the flight video.

DPJ   May 05, 2019  

Love the look of this thing, especially the stubby antenna for the VTX and how you've mounted it :D

Guides & Reviews

27 2,075  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more