Tomoquads Corsa Frame (75X w/Caddx EOS2) Conversion

By gsixx8fpv on Feb 10, 2019

3  108  0

With the BetaFPV having yaw twitch problems, I felt a different frame would solve the issue. The component swap is pretty straight forward. Be advised that space is at a PREMIUM and all wiring must remain under the canopy due to how close the spinning propeller tips are. I started with Gemfan 1.9" 3-blade props, but went back to stock props after adding the "bumpers" made from the old 75X frame. I did this so I could have a place to mount the LED/buzzer strip.

After conversion i must say... THIS THING RIPS!! The yaw twitch as disappeared as well. The GNB 2s 300mah 80c HV batts i went with are giving me 4:30 flight time cruising/light acro.

If your 75X has this issue, buy this frame and do the swap. You will not regret it.

Photos

Discussion

Sign in to comment

Guides & Reviews

46 4,829  41
Jan 15, 2019

The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..

Read more
14 2,837 
Nov 16, 2018

Update! Happymodel has released a new V2 Frame which uses a more durable plastic. The Happymodel Mobula7 is one of those rare treats to hit the micro scene. Countless models hit the market every month, but this one just happens to check all the boxes. It's a 2S brushless micro with a 75mm motor stance. It's slightly larger than the more traditional 65mm brushed micros, but it's still quite small...

Read more