this is my third Floss 3.0 race quad build for the season 2019. I'm using hyperlite 2205.5 1722kv motors and 6" hybrid rear arms on this one.
I also try the 20x20 Aikon stack in this one. Triedto keep this as simple as possible, so i designed a stack mount to XM+ and VTX and printed it from TPU98A.
AUW with props and strap is now 275g, not bad at all with Micro Eagle, 2205.5 motors and 6" rear arms?
VTX/XM+ mount: https://www.thingiverse.com/thing:3507166
Arm protectors (not sure if I will use them to save 10g): https://www.thingiverse.com/thing:2874494
Photos
Part List
Frame |
Hyperlite Floss 3.0 Race Frame "HYBRID"
(2 builds)
Pyrodrone.com
|
$44.99 |
Flight Controller |
AIKON 2020 Stack combo
(3 builds)
Pyrodrone.com
|
$79.00 |
Motors |
4 x Hyperlite 2205.5-1722KV HV EDITION
(7 builds)
Pyrodrone.com
|
$63.96 |
Propellers |
Gemfan Flash 5149 Propeller (Set of 4 - Clear Blue)
(9 builds)
Getfpv.com
|
$3.29 |
FPV Camera |
RunCam Micro Eagle 1/1.8" CMOS 800TVL Global WDR 16:9/4:3 Switchable FPV Camera for RC Drone
(206 builds)
Banggood.com
|
See Site |
FPV Transmitter |
TBS UNIFY PRO 5G8 HV - RACE 2 (MMCX)
(11 builds)
Pyrodrone.com
|
$29.95 |
Antenna |
Lumenier AXII MMCX 5.8GHz Antenna (RHCP)
(51 builds)
Getfpv.com
|
$17.99 |
Receiver |
FrSky XM+ SBUS 2.4GHz Mini Receiver
(1021 builds)
Racedayquads.com
|
$12.99 |
Batteries |
TATTU R-Line 1050mAh 6s 95C Lipo Battery
(8 builds)
Getfpv.com
|
$35.99 |
Guides & Reviews
This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..
Read more
The iFlight XL5 V3 is a fantastic freestyle frame for the price. It features chamfered edges on some very nice quality carbon fiber. My goal for this build was to use high quality components at a relatively low price. Not only that, but I managed to reduce the number of solder points to the bare minimum. I've never built such a plug-in-play quad! The flight controller has an integrated VTX and doesn't..
Read more
Bracket-fo-yo-stack-it. I like the design, but I want you to make it better. Somehow use less zip ties. I feel like you could get it down to 1 or 0 with very little more effort, you have it so close already. I have to say i'm impressed with your color coordination; teal TPU, blades, bells, turtle fin, AND zip ties. The contrasting orange on the mid-plate and prop nuts looks great!