PAPILLON

By Silver Surfer FPV on Feb 13, 2019

11 504 5

Put together this little light quad from the surviving leftover bits of my M7 after I SMASHED it into a camera that was recording my speedruns. I think it was going pretty fast, the stock frame and canopy broke in several places and the FC will not work anymore. So ordered a replacement FC and transferred the camera/buzzer/power plug to make a new quad. I wanted a light/agile quad that uses the 65mm props.

"PAPILLON" (Mobula7)
M7 Crazybee FC and M7 motors
65mm props
FLYSKY so I can use my Turnigy Evolution
3D parts listed below

3D Printed items used for this build (PLA/TPU)
Top camera holder (TPU) - By RCHELIPILOT -https://www.thingiverse.com/thing:3385420
(Just looks cool with that little fin)
Camera holder (PLA) - By KKBIN - https://www.thingiverse.com/thing:3389663
(holds most any AIO cameras, works great with M7 camera)
Frame (PLA) - By LEDRONECLUB - https://www.thingiverse.com/thing:3359505
(Frame inspired from KababFPV toothpick frame)
Battery holder (TPU) - By RONN2664 - https://www.thingiverse.com/thing:3287758
(Holds two 1S batteries on top of each other)

What was and what is - Salut M7 and Salut Papillon

PAPILLON BUILD VIDEO

Donor M7 during one of its successful speedruns, came close to hitting something here too.

PAPILLON (V2) TEST FLIGHT

MAXIMUM EFFORT THROTTLE

Photos

Part List

Flight Controller	Happymodel Crazybee F3 Flight Controller 4 IN 1 5A 1-2S Blheli_S ESC Compatible Frsky Receiver for Mobula 7 (10 builds) Taco-rc.com	$39.99
Motors	4 x 1pcs Happymodel Mobula7 SE0802 1-2S Brushless Motor 16000KV 19000KV 1.0mm Shaft Diameter Mini Motors for Indoor FPV Drones (3 builds) Aliexpress.com	$26.00
Propellers	10 Pairs Kingkong 65mm Blade Propeller Prop 20Pcs for 720 8520 Coreless Motor DIY Micro Quadcopter (30 builds) Banggood.com	$4.99
Batteries	260mAh 1S Lipo HV Battery (8PCS) (18 builds) Betafpv.com	$19.99

Show stores (4)

Like Copy Part List Follow Silver Surfer FPV

Discussion

sergetania Feb 13, 2019

Nice build and a very interesting collection of 3D printed parts. What material did you use for the frame? I am very curious to find out how the frame and nylon standoffs hold up. I would love an update after a couple of dozen crashes! Thanks a lot, great stuff! 👍

Silver Surfer FPV Feb 13, 2019

For the frame I used PLA, the red parts are TPU. I forgtot to include that in the description. Waiting for the weather to clear up to make the flight video. It either snowing, raining or too windy or all three here.

crisat Feb 26, 2019

I am also interested in the 3d printed parts. Sergetania, I think the frame is this one https://www.thingiverse.com/thing:3359505, from Alex Arvinte.

thijs fpv Feb 21, 2019

al your links lead to the wrong parts. could you please fix that?

Silver Surfer FPV Feb 21, 2019

All good again. Dont know what happended.

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews