Iron Man Wizard

By TMac on Feb 28, 2019

4  93  0

Rebuilt Eachine X220. Kept frame and motors. Removed side plates and used shorter standoffs. Installed 20x20 FC & ESC stack with 30x20 to 20x20 mount adaptor. Replaced four separate ESCs with one 4-in-1 ESC. Installed micro cam to replace mini cam. Installed adjustable gain external microphone to VTX for live FPV flight audio. Shed 81 grams of weight going from 399 grams to 318 grams without battery. Programmed BlHeli32 ESCs with Iron Man startup music from Rox Wolf.

Part List


Eachine Wizard X220S 220mm FPV Racing X Frame 4.0mm Frame Arms Carbon Fiber (9 builds)

Flight Controller

CLRacing MINI 20x20 Flight Controller - CLF4SDefault Title (24 builds)


Ori32 4in1 ESC 4x25A 2020 (82 builds)


4 x Eachine 2205 MN2205 2300KV 2-4S Motor For Eachine Wizard X220 X210 250 280 RC Drone FPV Racing Multi Rotor (20 builds)


DAL Cyclone T5046C Tri-Blade 5" Prop 4 Pack - Choose Your Color (396 builds)

FPV Camera

Foxeer Falkor 2 Micro FPV Camera - 1.8mm Lens - 1200TVL 16:9/4:3 PAL/NTSC G-WDR - Choose Your Color (62 builds)

FPV Transmitter

e708TM3 Pro (US Version) 5.8G FPV video transmitter 800mW adjustable with all legal frequency consistent with FCC Regulations


Actuna Gem BLOWOUT


FrSky R-XSR SBUS 2.4GHz Micro ReceiverDefault Title (823 builds)


Hobbypark 10PCS Aluminum M3x25mm Standoff Spacer Female-Female Round Column RC Multirotor Accessories DIY Green

Misc Parts

EUDAX 16 PCS Motor Spacer Shock Absorber Pads Damper Vibration Damping Washer Silicone Material for FPV Racing 22xx Series Brush

Misc Parts

SpeedyFPV Flight Controller Mount Adapter 30.5x30.5mm to 20x20mm to 16x16mm Vibration Damp

Misc Parts

Adafruit Electret Microphone Amplifier - MAX4466 with Adjustable Gain [ADA1063] (2 builds)

Misc Parts

3D printed Micro FPV Camera Mount
Show stores (7)


Sign in to comment

Guides & Reviews

27 1,991  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,798  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more