Very tight build but very nice looking.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice build! I have a similar setup as well and was wondering if the Gecko's cage is in your HD footage? Do you have the 8 or 12 mm lens?
I have the 12mm. The video is great but I do get the titanium guards on the edge of the video. It is not in the fpv feed.
I am going to relook at the board orientation. I may be able to get the camera forward a bit more but some resoldering will need to be done.
Thanks for the info, I have the same situation. I beleive the M8 has a little less FOV and why others I have talked to dont have this issue.
I have thought about trying a washer on the cage to see if I can space it out just enough. I did switch the camera mounts around but that put the camera to far folder and stuck out of the cage.
Here is video of mine.
https://www.youtube.com/watch?v=imGakqauGzs&t=21s
Yep my video shows the edges like yours. I edited them out in this video..
https://www.airvuz.com/video/Braddock-Oak-Session-1?id=5c7dce4272379e50dc1a2045