Intrepid V2 3 inch

By flickischris on Apr 22, 2019

6  550  4

AirbladeUAV Intrepid V2 3" with the Mamba Mini Flight Stack.

This is my most in-depth build to date, that being said, it wasnt overly difficult. I would highly recommend a fine tip soldering iron errr....tip.

It hasn't been airborne yet, but just git everything setup in Betaflight.

Photos

Part List

Frame

AirBlade Intrepid V2 3K Carbon Fiber Frame Kit - 3 inch and 4 inch (22 builds)
Airbladeuav.com
$36.99

Flight Controller

Diatone Innovations Mamba F405 Mini Power Tower MK2 (40 builds)
Airbladeuav.com
$37.99

Motors

4 x AirBlade Superman AB 1404 Brushless Motors (47 builds)
Airbladeuav.com
$51.96

Propellers

HQProp T3X3X3 PC Propeller (Set of 4) (37 builds)
Airbladeuav.com
$2.18

Propellers

Gemfan 3025 (2CW & 2CCW) PC Propeller (4 builds)
Airbladeuav.com
$1.99

Propellers

HQProp T3X3 Biblade PC Propeller (Set of 4) (15 builds)
Airbladeuav.com
$1.89

FPV Camera

Caddx Turtle V2 1080p 60fps HD FPV Camera - Red (64 builds)
Airbladeuav.com
$64.99

FPV Transmitter

AKK FX3 Ultimate uFL and MMCX Connector (17 builds)
Airbladeuav.com
$18.99

Antenna

TrueRC AXII MMCX 5.8Ghz (11 builds)
Airbladeuav.com
$11.99

Receiver

FrSky XM+ SBUS Mini ReceiverDefault Title (1430 builds)
Airbladeuav.com
$12.99

Batteries

RDQ Series 11.1V 3S 650mAh 80C LiPo Micro Battery - XT30 (7 builds)
Racedayquads.com
$12.99

Misc Parts

H Type Tail Light Loud Buzzer Matek ( Dual Control FC Flight Controller & TX Transmitter Control Mode,8 WS2812B LEDS)+ 4pcs
Amazon.com
$8.90

Misc Parts

AirBlade Intrepid V2 Soft Mount Camera Plates
Airbladeuav.com
$6.99

Misc Parts

ND filter (3 builds)
Caddxfpv.com
$5.99

Misc Parts

AirBlade 5V Addressable LED for AirBlade Intrepid V2
Airbladeuav.com
$5.99

Misc Parts

Ummagawd UMMAGRIP Universal Super Sticky Battery Pad (137 builds)
Racedayquads.com
$4.99

Misc Parts

Forever Antenna Tube 2 Pack - Choose Your Color (11 builds)
Racedayquads.com
$2.99

Misc Parts

45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color (4 builds)
Racedayquads.com
$1.99
Show stores (4)

Discussion

Sign in to comment

flickischris   May 25, 2019  

Lylel   Apr 26, 2019  

Nice, can I ask the weight with a battery? I'm thinking of this setup but possibly dual camera. I wonder if it will be under 250g?
Thanks

flickischris   Apr 26, 2019 

Ill have to throw it on the scale again but i believe i was at 227g with an 850mah 3s. get rid of the leds and use biblades and i think you would be able to get it under 250g...i was going to go dual cam too but i dont think it is necessary with the turtle.

ghostface   May 04, 2019 

I built it with dual cam - its about 170g with a bunch of 3d printed stuff so yeah with 650mah 4s you are pretty much exactly at 250g
Will post build soon. I used 1407 brat motors and dys 3" triblade props, micro swift and caddx turtle v2. f428 stack and r9mm rx.

Guides & Reviews

56 4,476  46
29 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,669  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more