Skystars Star-Lord 228

By Hectic_FPV on Mar 19, 2019

3 70 6

Recently saw a review of the Skystars Star-Lord BnF quad but really all I wanted was the frame as it looked like it was good quality. So after much searching, this was about 2 months ago, I finally found it and ordered one and it really is a quality frame.

Photos

Part List

Frame	Skystars Star-load 228 Part 228mm 6mm Arn Carbon Fiber Frame Kit for RC Drone FPV Racing (4 builds) Banggood.com	$41.59
Flight Controller	CLRacing F4S V1.6 AIO 30x30 Flight Controller (144 builds) Racedayquads.com	$74.99
ESCs	DYS F30A 30A 3-6S 30x30 4in1 ESC w/ BECDefault Title (74 builds) Racedayquads.com	$31.42
Motors	4 x RCX NK2207 2400KV FPV Racing Motor (NSK Bearing w/ N52SH Arc Magnet) Myrcmart.com	$71.96
Propellers	2 x STRIX TALON PROPS - 5x4x3 (1r, 1l) - Smoke (3 builds) Readymaderc.com	$1.78
FPV Camera	Caddx Turbo EOS2 FPV Camera NTSC 2.1mm (4 builds) Airbladeuav.com	$14.99
FPV Transmitter	AKK X2 FPV VTX (27 builds) Akktek.com	$16.99
Antenna	nidici Foxeer Lollipop 3 FPV Antenna 5.8GHz RHCP Ommi 2.5dbi MMCX Antenna for FPV Quadcopeter TX/RX/VTX (Angle)(Red,Pack of 2) (22 builds) Amazon.com	$19.99
Receiver	FrSky XM+ 2.4GHz Micro ReceiverDefault Title (1158 builds) Racedayquads.com	$15.99
Batteries	OVONIC 14.8V 4S 1300mAh 100C LiPo Battery Pack with XT60 Plug for FPV Freestyle (3 builds) Ampow.com	See Site
Radio	FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (50 builds) Racedayquads.com	$184.99
Goggles	Fat Shark Dominator V3 FPV Goggles (63 builds) Getfpv.com	$299.99
HD Camera	GoPro Session 3D Printed Camera Mounts (42 builds) Phaserfpv.com.au	$22.95
Video Receiver	Furious True-D V3.5 Diversity Receiver System Firmware 3.8A (FatShark Attitude Version)SKU: FPV-RX-TRUD3.8A (27 builds) Furiousfpv.com	$68.00
Battery Charger	VENOM PRO QUAD 100W 7A 4-PORT AC/DC Lipo, LIHV & NIMH BATTERY BALANCE CHARGER Racedayquads.com	$229.99
Soldering Iron	The Original X-Tronic 3020-XTS • 75W Soldering Iron Station • LED • 2 Helping Hands • Roll of Solder • (3 builds) Amazon.com	$54.75

Show stores (11)

Like Copy Part List Follow Hectic_FPV

Discussion

Devidpaul402 Nov 27, 2024

It's look seems dangerous. I like this Sprunki

kelseyradley Oct 02, 2023

I would want to convey my gratitude for the chance to learn about it through your presentation because it looks to be of great quality. I'm incredibly grateful for it. FNFR mods Retro Bowl College

xeniate Sep 08, 2023

thnak you

Palsen Nov 03, 2022

Here are all the original Squirt v2 files from Andy Shen. You will need to get the arm guards here. It is the round tips that are on the end of each arm.
https://www.thingiverse.com/thing:3351513

Here are all the original Slammed Squirt from Chris Teal:
https://www.thingiverse.com/thing:4729661

These are my Remixed files and custom stuff:
https://www.thingiverse.com/thing:5360572/files

Here are the different combo of ducts I modified from Chris Teal's slammed squirt. Read the description to help choose the duct that best fit the motors you are using. I think I will need to add more info because it did not occur to me until recently that most people do not have a sample ducts to get the measurements to assist them on picking the correct size duct.

https://www.thingiverse.com/thing:5376824

Good luck with your build! Let me know if you have any questions.

Palsen Nov 03, 2022

It seems to be of high quality, and I'd want to express my gratitude for the opportunity to learn about it via your presentation. I really appreciate it. fnf mods

shara123 Oct 05, 2022

I am looking forward to its build and will there be other builds?

Jodie Froster Mar 20, 2019

I thought the same thing when I saw it, does it fit the mini cam?

Show 6 more comments

Hectic_FPV Apr 06, 2019

Jodie, I crashed mine full speed into a 20 foot aluminum pole tower we were diving and ripping though a couple weeks back and nit a scratch on a motor or arm.