My 30th build had to be a Cinewhoop.
But I wanted enough power, so I put the Emax 1106 - 6000kV motors on, since it should also run on 4s. (The babyhawk does).
If you are going to build something with the Caddx Turtle V2, keep in mind that normal nylon standoffs won't work. I had to order M2x25mm bolts, to put it together.
Even then, it's a thight build. It took me 3 attempts to get everything to fit in there.
How is your weight and flight time? I'm barely getting 2 minutes on a similar setup at 116g AUW
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
HI sir how did you manage to fix in VTX and RX iam having a hard time. Please help
I used metal screws for the stack and plastic and rubber rings in between.
VTX is on top of the stack and the receiver is tie rapped against the back of the stack
You should be able to see it on the pictures