tiny_plus

By fovea on Mar 24, 2019

7  90  0

my first plus, tiny brushed plus. 1mm carbon stiffener as frame, fit between the conector, i cut the corners . furibee f3, cam vtx aio. 4blades and some kk 3blade for a second try.

prop in the middle of the screen is well, i dont need an osd for the crosshairs :-P
plus should be special bad for rear and front motor as a brushed setup, but i would try the tiny plus. without ducts unbraked speed, first try indoor was not enough space, second try will be with a bit more space outdoor.

(i upgrade the partlist with the fc, i couldnt find a link at first. first time i saw this shop: banggearwatch :-D probably there is another mix like "bestgood" )
update: banggearwatch is a price history tracker not a shop

Photos

Discussion

Sign in to comment

Guides & Reviews

27 2,279  31
25 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,891  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more