SON OF PHERAL FANTOM WILD WIZZ

By kwadkenstine on Mar 24, 2019

3  56  2

4 inch frame .
Wizzard bits
GEMFAN props?
4s 1300.
SOLDERING TIP.
MOTOR WIRES.
Only strip 1.5 -2 mm of insulation. this will help the solder to ball up on the wire when tinning.
hot iron 450-470 c
tin both surfaces place wire on top of final position.
IMPORTANT , PLACE IRON ON SIDE NOT TOP LET GRAVITY AND THE SURFACE TENSION OF THE MOLTEN SOLDER TO FORM IT INTO A NICE BALL AND REMOVE HEAT (AT THIS TIME DO NOT LET THE WIRE MOVE IF IT MOVES WHEN COOLING BAD THINGS CAN HAPPEN.)
And for all you car bufs WHAT IS IT.
A 1978 Holden HZ V8 premier stationwagon.
UPDATE.
flew this guy today , glad i did it was a blast.
First pack on 3. something default everything , a bit washy but not bad.
4th pack 4.2 default everything . still a tiny bit of wash but its more like a tiny stutter rather than a wooshy shudder. held lines better , the motors sounded less urgent somehow more relaxed with pep , flips and rolls a bit slow for steel balls crotch high flips but smooth and stopped dead.Sounds like im raving ,,,,,cause i am . sorry got a bit hot there.
me not the motors.
I forgot to mention this little guy is still running a spf3 or clone of .

Photos

Discussion

Sign in to comment

Jodie Froster   Mar 25, 2019  

I am a fellow OG wizard pilot, I love to see the new lives that they take on. What made you decide on a 4" prop/frame?

kwadkenstine   Mar 25, 2019 

I wanted to see if smaller dia but fairly bity props would let the 2205 2300kv spin up faster and rev higher.
A lot of energy is used to spin the tip of any prop

Guides & Reviews

29 3,035  21
23 days ago

You've probably heard the term "Cinewhoop". Traditionally it's a 3" ducted quad capable of carrying a GoPro Hero7 Black at a low 10 degree angle. More recently the term "Cine" has been applied to a number of RTF quads ranging from 85mm to 3". They all focus on their HD capability, but none compare to the stabilization of Hypersmooth (only available on the Hero7 Black). This is what really offers that..

Read more
41 5,354  42
May 31, 2019

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more