Custom designed armattan frame with 30mm inner dimension. Angled for the "holeshot". Similar to HoleShot v1 but excess carbon trimmed, ESCs moved to bottom. 319g with zmx v2 motors.
Flight Controller |
Mini F3 Flight Controller 6 DOF/10 DOF for Multicopter Racing
Banggood.com
|
$22.24 |
ESCs |
4 x Aikon SEFM 30A ESC
(24 builds)
Getfpv.com
|
See Site |
Motors |
4 x ZMX V2 Motor 2205-2633KV (Purple cap)
Silver-drone.com
|
$71.16 |
Propellers |
RaceKraft 5 Inch Tri-Blade Propeller Insane Speed - Transparent RK5051
(23 builds)
Getpropsman.com
|
$3.99 |
FPV Camera |
Foxeer HS1177 XAT600M 5~22V NTSC 2.5mm lens
Droneeclipse.com
|
$37.99 |
FPV Transmitter |
Eachine ET526 5.8G 40CH 25mW/200mW/600mW Switchable FPV Transmitter
Banggood.com
|
$20.99 |
Antenna |
RP-SMA 5.8G 3dBi Soft Omni Directional High Gain Antenna RG 178 Cable For RC Drone
(4 builds)
Banggood.com
|
$1.99 |
Receiver |
LemonRX DSMX-Compatible Satellite Receiver with Diversity Antenna
(46 builds)
Airbladeuav.com
|
$13.10 |
Power Distribution |
Matek Micro PDB With 5V 12V Dual BEC Output for RC Drone FPV Racing
(3 builds)
Banggood.com
|
$5.49 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I like the way this looks! What program did you use to design it?
Thanks! I used sketchup and exported to dwg. Currently modifying this for stretch arms and 25mm mount holes for micro omnibus fcs. Should make wiring super simple.
Cool, thanks.