I decided to upgrade my tyro99 a little as a fun build. Frame was replaced with the iflight XL5 V3, the bottom plate has been flipped to make room for a 3 high stack.
The stack is the 4in1 ESC and Flight controller from the Tyro99. Motors were replaced with the iflight XING camo 2306 2450kv, except only 3 turned up so to finish the build I got a purple iflight XING 2306 2450kv motor.
The camera is the Runcam Micro Swift 3 V2 with UART control setup. Video output is from a Rush Tank VTX. Finished off with JonnyFPV props, FrSky R9MM and Ummagrip
Frame |
iFlight XL5 V3 240mm FPV Freestyle Frame Kit Carbon Fiber for RC Racer Quadcopter DIY Drone
(6 builds)
Xt-xinte.com
|
$36.99 |
Motors |
4 x IFLIGHT XING X2306 2-6S FPV NEXTGEN MOTOR UNIBELL
(30 builds)
Pyrodrone.com
|
$79.96 |
FPV Camera |
RunCam Micro Swift 3 V2 FPV Camera CCD
(3 builds)
Airbladeuav.com
|
$26.99 |
FPV Transmitter |
RUSH VTX TANK 5.8G 48CH Smart Audio 0-25-200-500-800mW Switchable AV Transmitter for RC Drone
(75 builds)
Banggood.com
|
$32.99 |
Antenna |
VAS Minion SMA 5.8GHz Antenna (RHCP)
(17 builds)
Getfpv.com
|
$14.99 |
Receiver |
FrSky 900Mhz R9MM-FC 16CH Long Range Telemetry Receiver S.Port Enabled for RC Drone
(43 builds)
Banggood.com
|
$22.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I have the same frame and wanted a little more room in the stack and never thought to flip the bottom plate But we have very similar taste as our builds are almost twins! I want to replace my Xing 2206 motors with the camo 2306s you are running. I also just started using the Johhny FPV props and love em!
Got to test it out today. The Johnny props and the XING motors are a smooth combo. It's so quiet too.
Hey man hit me up if ya ever sell the 2206 xings love mine