An update to my Core Micro frame. I was not happy with the performance of the Caddx EOS2 in v1 so I adjusted the design to allow use of a 19mm micro camera.
This is my first test of using the new iflight succex 16x16 stack. I also added 2.5mm arms just because it only cost me $0.30 more than what 2mm arms ran.
Flight Controller |
SucceX Micro F4 Flight Tower System 16x16mm
(13 builds)
Pyrodrone.com
|
$42.99 |
Motors |
4 x iFlight BeeMotor 1104 9500Kv Micro Motor
Racedayquads.com
|
$39.96 |
Propellers |
GEMFAN 24pcs Flash 2540-3 Propellers 2.5x4.0 Inch Triblade Props 3-Blade Compatible with 1104 -1105 1106 FPV Mini Racing Motors
(136 builds)
Amazon.com
|
$10.99 |
FPV Camera |
RunCam Racer 2 700TVL 4:3 NTSC/PAL CMOS Micro FPV Camera (2.1 or 1.8mm) - Orange
(5 builds)
Racedayquads.com
|
$37.99 |
Antenna |
Lumenier Micro AXII U.FL 5.8GHz Antenna (RHCP)
(7 builds)
Heli-nation.com
|
$19.99 |
Receiver |
FrSky XM+ SBUS 2.4GHz Mini ReceiverDefault Title
(1238 builds)
Racedayquads.com
|
$12.99 |
Batteries |
GNB 2S 520mah HV 80C XT30 Lipo Battery
(2 builds)
Goodventuredrones.com
|
$7.89 |
In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..
Read moreWhen the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..
Read more
how tall is the succex stack?
15mm
is that top of the vtx to bottom of the esc or does it include the nuts/tpu spacers on the bottom and top.
its the measurement between top and bottom red grommets. i added a tpu XM+ mount on top and didn’t use the lock nuts and the total height us 20mm.