shutterbug 85x

By wklee.fpv on Apr 08, 2019

25  3,020  5

Setup:
Shutterbug Frame Kit
HBS F405 F4 Flight Controller
HBFPV 1103 11000KV motor
Emax AVAN props
Caddx Turbo EOS2
TBS Unify PRO NANO 5G8 vtx
TBS Crossfire Nano Rx
GNB 7.4V 2S 450MAH 80C Lipo Battery

Weight: ~45g

Discussion

Sign in to comment

otterprince   Apr 13, 2019  

Looking to use the same board also, however I ran into a problem where ESC no3. is not recignised in blheli (and to motor does not spin up). Could list the motor resources you are set on in BF?

wklee.fpv   Apr 21, 2019 

Hi, did you try to upgrade the firmware? if it still does not work, you need to contact the dealer.

otterprince   Apr 22, 2019 

Thanks for the tip. Board turned about DOA.

Terrorbirb   Apr 09, 2019  

Nice build. Got one of those boards on the way. Hope they last longer than the Crazybee ones.

wklee.fpv   Apr 11, 2019 

Hi, it is a good 2s board and get enough ports for the TBS setup (crossfire, unify)

Guides & Reviews

27 1,960  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,791  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more