Andromeda (iFlight iH3)

By Armand9x on Apr 18, 2019

15 43 3

My goal was to build something with enough power to carry a split mini with out props in the field of view.

Weighs in at around 220 grams with a 650mah 4S battery.

Flight:

Photos

Part List

Frame	iFlight iH3 V2 Dual Stack HD 3 inch FPV Frame Rotorvillage.ca	$39.99
Flight Controller	Heli-Nation Talon F7 20x20 Flight Controller w/ BB Rotorvillage.ca	$44.99
ESCs	Spedix IS25A 25A 20x20 4-in-1 BLHeli_S ESC Rotorvillage.ca	$39.99
Motors	4 x RCX NK1306 4000KV FPV Racing Motor (Japan NSK Bearing w/ Arc Magnet) (2 builds) Myrcmart.com	$47.96
Propellers	HQProp T3X3X3 PC Propeller (Set of 4) (38 builds) Airbladeuav.com	$2.18
FPV Camera	RunCam Split Mini 2 w/M12 lens mount (89 builds) Rotorgeeks.com	$94.49
FPV Transmitter	CA$14.90 21% Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter RC Parts from Toys Hobbies and Getfpv.com	$10.99
Receiver	FrSky XM+ w/ACCST 1.X (1158 builds) Rotorgeeks.com	$18.47
Batteries	GNB 650 mAh 4S 14.8V 80C/160C XT30 (26 builds) Airbladeuav.com	$16.49

Show stores (5)

Like Copy Part List Follow Armand9x

Discussion

GixxerJasen Jul 22, 2019

I really like this build and have been using it as a base for my first build. Almost got all the parts. Two questions if you don't mind. What's mounted to the top part? I see the fpv transmitter but what's the other thing toward the top of the photo. Also, what's with all the blue tape?

Armand9x Sep 29, 2019

FC is mounted at the top. the blue tape just keeps out mushed up grass.

makopolo Jul 31, 2019

Looking at using this as a guideline for my first build. There seems to be a lot of room in the frame and really light.

effwerd May 02, 2019

What did you think of that FC? Good layout? Good enough documentation? No problems getting the right target on it and co figured? Nice build!

Show 1 more comment

Armand9x May 03, 2019

the other user who chimed in is correct, and I agree that it is a good FC. I did have one issue with a grey screen on my video feed, but it appears to have been fixed with a cli command. I would buy it again if I built a second quad.

Armand9x May 03, 2019

“If there is a delay in startup for the CLF7 target, type the commands below in the CLI
resource i2c_sda 2 none
resource i2c_scl 2 none
save
this will fix the delay start up problem”