Mako

By fish on Apr 24, 2019

4  99  3

Just a generic 185mm true-x frame with a custom designed pod that sits on top of the 30.5mm stack. Very narrow clearance with 5.1" props.

Had a faulty motor but once I get that fixed it should be a rocket.

Photos

Part List

Flight Controller

HyperLite F4 OSD V2 with VTX PIT mode (10 builds)
Pyrodrone.com
$32.99

ESCs

T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC w/ BEC (20 builds)
Racedayquads.com
$74.99

Motors

Drone Motors for -Racing and Freestyle - RaceDayQuads (18 builds)
Racedayquads.com
$13.99

Propellers

T-Motor T5143-1 Ultralight POPO Compatible Tri-Blade 5" Prop 4 Pack - Choose Your Color (39 builds)
Racedayquads.com
$2.09

FPV Camera

Foxeer Arrow Micro Pro 600TVL CCD FPV Camera w/ OSD (2.1mm or 1.8mm) - Choose Your Color & Lens (228 builds)
Racedayquads.com
$19.99

FPV Transmitter

TBS UNIFY PRO32 NANO 5G8 (186 builds)
Pyrodrone.com
$29.95

Antenna

TrueRC AXII-U.FL RHCP 5.8 - Heli-Nation (2 builds)
Heli-nation.com
$17.00

Receiver

FrSky XM+ SBUS 2.4GHz Mini ReceiverDefault Title (1368 builds)
Racedayquads.com
$12.99

Batteries

Tattu R-Line Version 3.0 1300mAh 22.2V 120C 6S1P Lipo Battery Pack with XT60 Plug (36 builds)
Pyrodrone.com
$36.99

Radio

FrSky Taranis QX7 2.4GHz RC Transmitter - Black or WhiteBlack / No (205 builds)
Racedayquads.com
$105.30

Goggles

Fat Shark Dominator V3 FPV Goggles (56 builds)
Getfpv.com
$299.99

HD Camera

GoPro HERO5 Session - Waterproof Digital Action Camera for Travel with 4K HD Video 10MP Photos (3 builds)
Amazon.com
$239.99

Video Receiver

LaForge V4 Fatshark Module with Diversity Option - RMRC (6 builds)
Readymaderc.com
$69.99

Radio Module

FrSky R9M Transmitter Module (67 builds)
Racedayquads.com
$34.99

Battery Charger

TP4X610HV
Thunderpowerrc.com
See Site

Soldering Iron

Super Deal PRO 2in1 Soldering Station 862d+ SMD Hot Air Rework Station Soldering Iron Station LED Display W/4 Nozzle
Amazon.com
$53.89

Backpack

Sawtooth
Granitegear.com
$74.95

Misc Supplies

TrueRC True-Mox 915 Antenna (2 builds)
Getfpv.com
$19.99

Misc Supplies

IBCrazy 5.8GHz 7.5dbic Helical Goggle Mount
Getfpv.com
$17.99

Misc Supplies

VAS ION V2 5.8GHz SMA Antenna (RHCP)
Getfpv.com
$16.99
Show stores (8)

Discussion

Sign in to comment

kwadkenstine   May 16, 2019  

fully sik bro , go hard till you go home . that stack aint going nowhere if the below mentioned screws in the canopy do what i think they is doing

IcarusIX   May 15, 2019  

what are the two larger screws in the side of the canopy for?

Jodie Froster   Apr 25, 2019  

Pod design is nice looking. Definitly not going to keep your stack from shearing and shorting out lots of parts when you crash though...

Guides & Reviews

27 1,999  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,800  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more