More Massive Droner 3"

By mrcasey69 on May 03, 2019

17  798  2

This completes my recent run of Catalyst Machine Works builds. These frames are excellant to build. Likely more to come.
Links to my other two, recent CM builds:


Part List


MORE Massive Droner 3 inch (24 builds)

Flight Controller

AIKON F4 Mini 20x20 Flight Controller with OSD


AIKON AK32PIN 4IN1 35A 6S 20X20 ESC V2


4 x Brother Hobby Avenger 1507 Motor (3 builds)


GEMFAN FLASH 3052 (3" PROP) (7 builds)

FPV Camera

Runcam Micro Eagle Camera (297 builds)

FPV Transmitter

TBS Unify Pro32 Nano 5G8 V1.1 (11 builds)


Lumenier Micro AXII MMCX 5.8GHz Antenna (RHCP) (2 builds)


TBS Crossfire Nano RX - FPV Long Range Drone Receiver (568 builds)


4 x Tattu R-Line 850mAh 4s 95c Lipo Battery (27 builds)


WaFL’s XT60 Cap Cap (Set of 3) (4 builds)
Show stores (3)


Sign in to comment

mrcasey69   May 05, 2019  

That was the plan. Whitenoise board for vtx and rx really helps.

Jodie Froster   May 05, 2019  

Woah dang, yo stack so clean!

Guides & Reviews

24 1,825  27
20 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,760  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more