Fizzy Jerkz

By TaterrsFPV on Jun 05, 2019

4  270  4

Really Great Frame!! Strong but light in design. Motors & VTX were bought from Thanks for checking out and happy Flying folks!!!


Part List


Rooster (133 builds)

Flight Controller

Matek F405-CTR 30x30 Flight Controller (32 builds)


Holybro Tekko32 F3 35A 3-6s BLHeli32 ESC (Set of 4) (3 builds)


4 x Welcome to WataugaQuads (4 builds)
See Site


DAL Cyclone T5040C Pro Tri-Blade 5" Prop 4 Pack - Choose Your Color (26 builds)

FPV Camera

Foxeer Monster Mini Pro V3 1200TVL CMOS 16:9 WDR FPV Camera (1.8 or 2.5mm) - Choose Your Color & Lens (20 builds)

FPV Transmitter

Welcome to WataugaQuads (4 builds)
See Site


MenaceRC Raptor Stubby 5.8GHz SMA Antenna - RHCP or LHCP (4 builds)


FrSky R9MM Long Range 915MHz RC Receiver - Get Yours Today! - RMRC (96 builds)


CNHL 14.8V 4S 1500mAh 100C G+ Plus LiPo Battery - XT60 (50 builds)


FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (50 builds)


Fat Shark Dominator HD2 Terminator Edition FPV Goggles (4 builds)

HD Camera

GoPro HERO5 Session (6 builds)
See Site

Misc Parts

SainSmart TPU Flexible 1.75mm Filament 0.8kg Spool - Choose Your ColorWhite (8 builds)

Video Receiver

FuriousFPV True-D X (for Fatshark Dominators) - RedSKU: FPV-RX-TRUDX (2 builds)

Radio Module

FrSky R9M Module (69 builds)
Show stores (8)


Sign in to comment

HK-AERIAL VTOL   Jun 05, 2019  

So let me ask you... how do you get the capacitor leads into the XT60? BTW: Nice rig. =]

TaterrsFPV   Jun 05, 2019 

Thanks for the kind words and here is what I use really great product

HK-AERIAL VTOL   Jun 05, 2019 

OH SNAP! I am gonna need to get some of those. I thank you for sharing.

TaterrsFPV   Jun 08, 2019 

Make sure you tack solder the xt60 & cap before you go all the way makes things easier.

Guides & Reviews

39 3,830  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,682  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more