Rotor Riot Flow - Slammed Edition
By KryptoSteel24 on May 16, 2019
This build is very advanced and was a HUGE challenge to get everything to fit in that tiny little deck, if you aren't an experienced builder buy the regular non slammed version of this frame 
Update: I had to re route all of the wires to be under the flight controller to accommodate my battery strap
Photos
Part List
Frame |
Rotor Riot Flow 5" Freestyle Frame - Normal or Slammed
(3 builds)
Rotorriot.com
|
$74.99 |
Flight Controller |
PYRODRONE F4 OSD V2 with VTX PIT mode
(21 builds)
Pyrodrone.com
|
$32.99 |
ESCs |
PYRO32F3-45Amp 4in1 F3 32bit BLHELI ESC 4x45A
(10 builds)
Pyrodrone.com
|
$49.99 |
Motors |
4 x HYPERLITE 2408.5 TEAM EDITION (CHOOSE KV)
(20 builds)
Pyrodrone.com
|
$99.96 |
Propellers |
Gemfan Hurricane 51466 Durable Tri-Blade 5" Prop (Set of 4 - CLEAR)
(18 builds)
Taco-rc.com
|
$3.29 |
FPV Camera |
Caddx Ratel Analog FPV Camera | USA ONLY
(28 builds)
Caddxfpv.com
|
$19.99 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (SMA)
(197 builds)
Getfpv.com
|
See Site |
Antenna |
10CM Foxeer Lollipop 2 RHCP 5.8G Antenna For LONG RANGE FPV(2pcs)
(4 builds)
Pyrodrone.com
|
$19.99 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1502 builds)
Team-blacksheep.com
|
$24.95 |
Batteries |
Thunder Power Adrenaline V2.0 1300mAh 4S 100C Lipo Battery
(6 builds)
Getfpv.com
|
$31.99 |
Gear
Radio |
FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2)
(52 builds)
Getfpv.com
|
$244.99 |
Goggles |
Fat Shark Dominator HDO FPV Goggles
(136 builds)
Getfpv.com
|
$449.99 |
HD Camera |
GoPro Hero5 Session Waterproof 4K Video Camera
(303 builds)
Phaserfpv.com.au
|
$208.55 |
Video Receiver |
FuriousFPV True-D V3.8 Diversity Receiver System - Clarity Redefined
(17 builds)
Racedayquads.com
|
$55.99 |
Radio Module |
TBS Crossfire Micro TX V2
(154 builds)
Team-blacksheep.com
|
$69.95 |
Battery Charger |
IMAX B6AC LCD Screen Digital RC Lipo NiMH Battery Balance Charger Discharger Hot
(24 builds)
Ebay.com
|
$28.99 |
Tools |
Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)
(34 builds)
Amazon.com
|
$115.00 |
Looks awesome. I admire you for going with the 4-in-1 ESC. I'm building one now and didn't even consider it. This thing is low. I designed a little spacer to take up the gap in the back of the GoPro mount on the slammed frame. Looks much better than having to crush the back of the mount down. Happy flying!
https://www.thingiverse.com/thing:3636740/files
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I have some 2408.5's on an LR, and I am guessing on a 5" they make for just about the most powerful thing you'll ever fly. They lift a Ti LR + Session and all the fixins like nothing. I was wondering where you went for your KV choice (because you are using 4S). I looked at all your pics, but it's always just outta view (Hey! I know it ends in "22"... lol). I, of course, went the lowest (1622), what did you select for this one? I am guessing not 1622. Thanks for sharing!
2522kv, and yeah its got some nice power
I'm flying the 2722 2207's on an ARX-R. I like them quite a bit. I'd love to sample PD's entire line... even the 1106's and 1103's.
I have the 1103's for my toothpick