Pichon Rebelde (long range)

By Gesehen on Jun 16, 2019

4  466  3

After lost my Kwad (https://rotorbuilds.com/build/15024) I mounted another one to fly in the same high peak.

Full support to 6s battery.

I am addicted to long range. Where the recovery option is not an option.




Part List


Realacc Martian IV 7 Inch 300mm Wheelbase 4mm Arm Carbon Fiber FPV Racing Frame Kit (2 builds)

Flight Controller

MAMBA F405 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC (77 builds)


Diatone Black Mamba F40 40A 4-in-1 ESC (7 builds)


4X Racerstar 2207 BR2207S Green Edition 1600KV 3-6S Brushless Motor For RC Drone FPV Racing Frame (3 builds)


2 Pairs DALPROP CYCLONE T7056C 7inch Crystal 3-blade Propeller for RC FPV Racing Drone (11 builds)

FPV Camera

RunCam Swift 2 CCD 600TVL NTSC Mini Camera FOV 130/150/165 IR Blocked w/ OSD MIC For FPV RC Drone (415 builds)

FPV Transmitter

Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX LED Display Support OSD/Pitmode/Smart Audio (21 builds)


DYS FPV 5.8G Antenna 4dBi Mushroom Antenna RHCP TX RX SMA RP-SMA Male for RC Drone FPV Racing (32 builds)


TBS Crossfire Nano RX - FPV Long Range Drone Receiver (568 builds)


FatShark Dominator V3 RTF Bundle FPV Goggle with OLED Receiver Battery Case for RC Drone (56 builds)

Misc Parts

RDQ BN-880 Flight Control GPS Module w/ Compass (10 builds)

Video Receiver

Realacc RX5808-PRO-PLUS-OSD 5.8Ghz 48CH FPV Receiver Achilles Open Source For Fatshark Goggles (3 builds)

Radio Module

TBS Crossfire Transmitter

Battery Charger

ISDT Q6 Lite 200W 8A MINI Pocket Battery Balance Charger for 2S-6S Lipo Battery (20 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (145 builds)


DroneGuard CS 400 - A Commercial Drone Case Offering Flexible Organization and Protection for DJI Phantom or 3DR Solo and Access
Show stores (6)


Sign in to comment

JasonSuryadinata   Apr 09, 2020  

nice kwad.
i'm building a quad with the same frame and i also plan on using the same vtx (tx805).
the problem is that the tx805 uses an mmcx connector to use a SMA antenna i need to use the adaptor which is very long and there isn't very much space on the martian IV.
how do you mount the tx805 that way?
thank you.

lorenzo220580   Jul 18, 2019  

very nice build.
I have a similar project in my mind but I need an information.
does the gps connection work good on uart 1(as in you photo) or will need to invert rx to tx and tx to rx?
thanks in advance

Gesehen   Jul 27, 2019 

Yes, you need invert the rx and tx:
GPS tx -> FC rx
GPS rx -> FC tx

I was used the uart 1 to connect gps in mamba FC

enjoy :)

Guides & Reviews

24 1,808  27
20 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,757  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more