By Jeremy Chotto on Jun 21, 2019

8  1,019  9

I wanted to explore this 3inch category with a toothpick type build. I needed some motors that are powerful enough to swing a 3inch prop and still provided a decent flight time. People are using 1206 1304 1404 motors which is nice but I wanted to stay as light as possible. I also wanted to be able to use a small 3s battery and still get a good flight time. The RDQ 350mah is a battery of choice. So I ended up trying the emax 1106 4500kv motors. This ended up being a really good choice of motor paired up with the avan 3in triblade prop. Coming in with a dry weight of 74grams which is pretty light for a 3in and having super smooth efficient flights. This quad flies amazing and is the most silent quad I have ever flown also the flight times are excellent with the 4500kv motors. I think we are going to see a lot of these builds with 1206 1304 1404 motors in the future. I am happy with a 1106 because the amount of thrust it can provide along with still being a tiny motor. This is a awesome freestyle setup and is great for backyard ripping.



Sign in to comment

OCD   Jun 21, 2019  

Other than the frame and FC I literally have the same parts for my build!!! I am excited to see what you get out of this one!

Show 5 more comments
OCD   Jun 21, 2019 

ha ha ha Well there goes that purchase! I spent hours searching and somehow missed that.

Jeremy Chotto   Jun 22, 2019 

If you are looking for a toothpick like frame for your motors taco rc has a pickle 3in frame that supports 9mm and 12mm mounting patterns. Don't know what frame you are looking for are what u are trying to build but thought that might help. Also the Sanchez frame supports 12mm mounting pattern but the one from taco rc is pretty much the same. good luck

OCD   Jun 23, 2019 

Thanks Jeremy. I initiated a return via Amazon. It was a mistake. I found 5 of the 1106's (as I originally wanted) and have them on order. Live and learn. lol

Guides & Reviews

27 1,999  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,800  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more