Lil Deuce

By Wholelottanope on Jul 11, 2019

3  219  3

I'm beyond excited to finally get this frame built up. We've been waiting patiently for our motors to finally be released and put them on the frame they were made for (although you can run them on other frames if that's your thing.)

Obviously it's not my thing so I went with the Lil Deuce frame. Great carbon strength and although it was a cozy build with the BetaFpv F4 AIO 12A FC/ESC, TBS Crossfire Nano receiver and Unify Nano Pro 32 and Runcam Nano Racer all stuffed under the canopy - it all fits and stays protected from whatever you might fly this into. (not that anyone would notice - it weighs 55g without a battery)

The AIO flight controller/4in1 ESC has plugs for the motor connectors which coincidentally come installed on the new BARD* Lil Floaters motors. Plug and play. There was some motor remapping in Betaflight and setting the roll axis to the 180 degrees on account that the FC is inverted.

This does have a TBS Crossfire Nano installed so the antenna was a bit disproportionate although I have been looking at a smaller TBS 915 MHz antenna which may bring things back into frame.

This Lil Deuce is ridiculous good fun.

Hopefully the pictures help with another's build process.



Part List


Lil' Duece 2" FPV FrameDefault Title (3 builds)

Flight Controller

BetaFPV F4 AIO Flight Controller 2S-4S 12A


4 x Lil Floaters 1103 8000kV 2S-3S Brushless Motors (2 builds)


Lumenier 2.2x3 Micro Propeller (Set of 8 - Black) (9 builds)

FPV Camera

RunCam Racer Nano FPV Camera (2 builds)

FPV Transmitter

Team BlackSheep TBS Unify Pro32 Nano 5G8 Video Transmitter (3 builds)


Team BlackSheep TBS Crossfire Nano ReceiverDefault Title (2 builds)


TBS Tango (11 builds)
Show stores (4)


Sign in to comment

FrenchB   6 days ago  

So hot.
Did you just steal wrckit's build?

Wholelottanope   6 days ago 

HA! Nope. I did get a lot of helpful advice from him though. We are running slightly different FCs and motors. Those are his prints too.

RAHFPV   11 days ago  

Love it!!

Guides & Reviews

36 4,094  38
May 31, 2019

A couple years ago I built the TransTEC Frog and since then I've been patiently waiting for another TransTEC frame to catch my eye. Fast forward to today and the TransTEC Laser S is that frame. It's a 82g racing frame that features 6mm arms, a TPU micro cam mount, 30.5mm and 20mm stack mounts and 3K carbon and 7075 hardware. My goal here was to build a high quality 6S racer at a reasonable price. I'd..

Read more
Apr 17, 2019

This is the 4th installment to my popular "Wizard Killer" series, and is based on the popular Wizard X220HV 6S. As usual, the goal was to build a substantially better quad, yet come in below the retail price of the BNF kit. Here are some of the improvements: Higher quality EMAX ECO 2306 1700kv motors Foxeer's top-of-the-line Falkor mini camera Eachine 25mw-1000mw Leaf VTX with microphone Tools This..

Read more