Marmotte Blue
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how did you mount the 3 high stack? is there space for it? thanks.
I split the stack. I have the ESC and FC in one stack. I printer an R9mm holder for the 20x20 slot in the front and then a 20x20 to 30x30 piece to place on top to mount the VTX too. The SMA adapter was long enough to reach from the back mounting spot. I can send a picture later if you like.
cool, pictures would be awesome. did you use somthing like this? https://www.thingiverse.com/thing:3856882 also could you link the 20 x 20 converter you used?
I used the R9 holder from this. https://www.thingiverse.com/thing:3505804 and the adapter I designed in Fusion 360. I can see if I can upload that somewhere.
thanks for the info. ill try to find something online since i dont have a printer. cheers