Tomo Video
Frame |
Whoopee HD V2 Cinematic Nano Frame Kit
Tomoquads.miiduu.com
|
$20.95 |
Flight Controller |
F405 Brushless Flight Controller
(13 builds)
Betafpv.com
|
$16.99 |
Motors |
BetaFPV 1103 8000KV Brushless Motors (4PCS) for 75X 3S
(2 builds)
Team-blacksheep.com
|
$39.99 |
Propellers |
Gemfan 40mm Durable 3 Blade 1mm Propeller (4CW, 4CCW) - Clear Blue
Heli-nation.com
|
$4.99 |
FPV Camera |
RunCam Split 3 Series
(89 builds)
Shop.runcam.com
|
$69.99 |
FPV Transmitter |
Z02 AIO Camera 5.8G VTX (Wire-Connected Version)
(9 builds)
Betafpv.com
|
$27.99 |
Antenna |
Lumenier AXII U.FL 5.8GHz Antenna (RHCP)
(148 builds)
Getfpv.com
|
$14.99 |
Receiver |
FrSky XM+ 2.4GHz Micro ReceiverDefault Title
(1149 builds)
Racedayquads.com
|
$15.99 |
Batteries |
Gaoneng GNB 7.4V 2S HV 450MAH 80C Lipo Battery XT30 Plug For FPV Racer Freestyle
(8 builds)
Taco-rc.com
|
$5.99 |
Hardware |
2 x CLOSEOUT Rakonheli CNC AL 40mm Propeller Duct (2) (for 0603, 0703, 1103 Motor) (Orange)
Heli-nation.com
|
$32.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
how did you power the split mini!?
I used the VTX pads. The guts came from the BetaFPV 65X and I just removed the internal camera and soldered up the wires from the split.
and it supplies it with enough power?
Yep. Powers it no problem. Thought about switching to the iFlight board with VTX. Have the parts just need the time to test. Then I could connect up the camera control.