I have been looking for an excuse to build a 6S and the F7 I had, then I found this CRAZY thing. Not sure it will fly, but I will let you know...
Overall build was OK. Biggest pain was motor wires for front were not long enough and figuring a good way to run battery wires because they would be in line of sight for camera if you run over the top. Looking for a slimmer longer battery.
Lot of space for stack since I made a mount for the camera on the top of the cab.
Wasn't cheap, but it was a cool build.
I am selling this build. $300.00 . It has never been flown! LMK if interested.
Frame |
Flynoceros RatKwad Frame
(2 builds)
Theflynoshop.com
|
$139.99 |
Flight Controller |
Holybro Kakute F7 + Tekko32 F3 Metal 65A 4-in-1 ESC + Atlatl HV V2 Combo
Getfpv.com
|
$137.99 |
Motors |
4 x Lumenier 2207-11 1750KV JohnnyFPV V2 Motor
Getfpv.com
|
$103.96 |
Propellers |
DAL Cyclone T5047C Propeller (Set of 12)
(2 builds)
Getfpv.com
|
$5.94 |
FPV Camera |
Foxeer Mix 2 1080P 60fps HD FPV Camera
Getfpv.com
|
$68.99 |
Receiver |
FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM
(759 builds)
Getfpv.com
|
$20.99 |
Batteries |
TATTU 1300mAh 6S1P 75C 22.2V Lipo Battery Pack with XT60 plug
Getfpv.com
|
$24.31 |
Misc Parts |
Adafruit NeoPixel Ring - 12 x 5050 RGB LED with Integrated Drivers [ADA1643]
Amazon.com
|
$7.50 |
In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..
Read moreWhen the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..
Read more
How did noone comment on this thing?? it's beautiful!
They're all awe struck and speechless. I've built one and working on a second and I can verify it flies quite well.
nice! how's the crashability and balance? i guess it's not much of a basher but I'm curious
Pretty sure if you crash, it is going to hurt.. Will definetly lose the front grill.. Arms are pretty thick. Not much protection for the camera. I let you know for sure when I find my next tree.