Hyperglide 2.0

By d3c0de on Dec 04, 2019

4  226  0

Lost my last Glide frame in the water, so here's the replacement. Went with a 20x20 ESC this time and a Unify Pro HV 32 . The Unify was bigger than I expected, so it's just wedged in place and held into place with some industrial strength Velcro.I may come up with a 3D printed solution later, but it's not going anywhere how it is.

Flies great on Betaflight 4.1.1.



Sign in to comment

Guides & Reviews

27 2,031  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,804  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more