Gnarly Primo V110x

By Ikuiku on Aug 26, 2019

12  570  0

This was my first toothpick build and I ordered the Amax motors which has the 3 hole mounting pattern which only one screw hole would line up. So I ended up drilling out a 3rd hole in the frame. It works fine and has taken many crashes! Since the Happy model boards were having issues with the 5v regulator, I added a micro 5v step down converter to power the camera and vtx. I've flown over 50 packs with out any issues.

Photos

Discussion

Sign in to comment

Guides & Reviews

22 1,069  11
14 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,735  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more