My first 2" micro build came out pretty well. The "Purple Drip"
Had some parts lying around and thought "let's build a 2", why not". Soldered the motors directly to the board and put the Crossfire Nano Receiver under the Board.
Flys very nice without any oscillations, only the 4 blade props drain the battery very quick, other than that all perfect :D
Dry Weight 48g
using a 300mah Happymodel Battery, might change to 450mah, as the Props are powerhungry :D
Frame |
HX100 Carbon Fiber Frame
(3 builds)
Drone-fpv-racer.com
|
See Site |
Flight Controller |
F4 2-4S AIO Brushless Flight Controller 12A V2 (BLHeli_S)
(40 builds)
Betafpv.com
|
$39.99 |
Motors |
BetaFPV 1103 8000Kv Micro/Whoop Motor 4 Pack
(7 builds)
Racedayquads.com
|
$39.99 |
Propellers |
6 Pairs Emax AVAN Micro 2 Inch 4-blade RC Drone FPV Racing Propeller for 11XX 4500-6500KV Motor
(15 builds)
Banggood.com
|
$10.99 |
FPV Camera |
RunCam Nano 2
(184 builds)
Shop.runcam.com
|
$19.99 |
FPV Transmitter |
A01 25-200mW 5.8G VTX
(3 builds)
Optimum-racing.ch
|
$14.90 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1503 builds)
Team-blacksheep.com
|
$24.95 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Do you have to direct solder the motors?