Acrobrat clone

By deadmoo on Sep 10, 2019

2  140  6

Made will salvaged Furibee X140 BNF parts. Parts in list are just approximation of what came with the BNF.

Part List

Frame

FPVKing 163mm FPV Racing Drone Frame 3 Inch Carbon Fiber Quadcopter Frame Kit Lipo Battery Strap
Amazon.com
$26.99

Flight Controller

Anniversary Special Edition Eachine Minicube Flytower 20x20mm Compatible Frsky Flysky DSM RX F3 ESC (19 builds)
Banggood.com
$49.99

Motors

4X Racerstar Racing Edition 1306 BR1306 3100KV 1-2S Brushless Motor CW/CCW For 150 180 200 RC Drone FPV Racing (4 builds)
Banggood.com
$32.97

Propellers

HQProp T3X3X3 PC Propeller (Set of 4) (19 builds)
Airbladeuav.com
$2.18

FPV Camera

Crazepony Caddx Turtle V2 FPV Camera HD 1080P/60fps Mini HD Cam DVR 800TVL CMOS 1.8mm Lens 16:9/4:3 NTSC/PAL Switchable with OSD
Amazon.com
$67.99

FPV Transmitter

Wolfwhoop Q4-Pro 5.8GHz VTX with MMCX Antenna Connector and 0.01/25/200/400/600mW 37CH Switchable FPV Transmitter with Smart Aud (3 builds)
Amazon.com
$16.99

Antenna

Realacc RHCP Super mini UXII Stubby 5.8GHz 1.6dBi FPV Antenna For TX RX Fatshark Goggles RC Drone (40 builds)
Banggood.com
$6.99

Receiver

FrSky R9 Mini 900MHz Long Range Receiver (49 builds)
Getfpv.com
$19.99

Batteries

Tattu R-Line 850mAh 4s 95c Lipo Battery (20 builds)
Getfpv.com
$19.99

Batteries

TATTU 650mAh 4S1P 75C 14.8V Lipo Battery Pack with XT30 plug (31 builds)
Getfpv.com
$14.99

Radio

FrSky Taranis QX7 2.4GHz RC Transmitter - Black or WhiteBlack / No (175 builds)
Racedayquads.com
$105.30

Goggles

Fat Shark Dominator V3 FPV Goggles (44 builds)
Getfpv.com
$299.99

HD Camera

Runcam 5 4K Box Action Camera (5 builds)
Unmannedtechshop.co.uk
$123.91

HD Camera

GoPro HERO5 Session (191 builds)
Amazon.com
$305.99

Hardware

Ummagawd Acrobrat Accessory Kit (5 builds)
Brain3d.co
$18.00

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (105 builds)
Getfpv.com
$149.95

Radio Module

Team BlackSheep TBS Crossfire Micro TX | Heli-Nation.com (82 builds)
Heli-nation.com
$69.99

Radio Module

FrSky R9M Module (55 builds)
Pyrodrone.com
$30.00

Battery Charger

2 x ToolkitRC M8 DC 300W 15A Battery Balance Charger Discharger for 2-8S Lipo Battery (11 builds)
Banggood.com
$79.98

Battery Charger

ISDT T8 BattGo 1000W 30A Smart Battery Balance Charger For 1-8S Lipo Battery (5 builds)
Banggood.com
$136.49

Soldering Iron

MINI TS100 Digital OLED Programable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (110 builds)
Banggood.com
$49.99

Tools

XIAOMI Wowstick 1F+ 64 In 1 Electric Screwdriver Cordless Lithium-ion Charge LED Power Screwdriver (6 builds)
Banggood.com
$29.90

Backpack

IFlight Backpack Case with Radio Transmitter FPV Goggle Motor and Support Hang RC Drone FPV Racing (5 builds)
Banggood.com
$43.89

Accessories

FrSky 900MHz Super 8 Antenna for R9M and R9M Lite Module (5 builds)
Racedayquads.com
$9.90

Accessories

TBS Diamond Antenna (16 builds)
Getfpv.com
$24.95

Accessories

Lumenier AXII 2 5.8GHz Stubby 90° SMA Antenna - RHCP or LHCP (2 builds)
Racedayquads.com
$19.99
Show stores (9)

Discussion

Sign in to comment

babipsylon   4 days ago  

Any idea if the sides will fit on original bottom plate?

deadmoo   2 days ago 

I would guess not. It is not an exact copy. It seems to be scaled down a bit.

babipsylon   8 days ago  

Is this an exact copy of the ummagawd frame? I ordered the acro 3 from bg, and there are some annoying differences:

Sadly, the original ummagawd dampners for the sides do not fit in the smaller holes of these sides. And that's the whole point of this frame, good dampners, the ones included here are not as good.

Be aware that this frame is less height than original (3mm difference +-). Because the damners are much smaller. Only very tight stacked pcb's will fit underneath the hood, sadly. It's also a few mm less wide than original frame, so small cameras don't fit well (frame too wide), and big cameras neither (too small frame). So you need to find your own solution to that.

It's half the price of the original, so well, you get what you pay for. With some small adjustments however, they could make this frame much better.

but maybe this one is better?

deadmoo   2 days ago 

This is not an exact copy but the dampers on this one seem to work well on this clone.

Sasquads   Sep 11, 2019  

How's the performance? Still want to build one, but I think the frame, especially with TPU prints is kind of heavy.
Is it?

deadmoo   Sep 11, 2019 

It is okay. It is probably just a little bit worse compared to Furibee X140 that I salvaged the parts from.

Guides & Reviews

3 2,068  9
Sep 18, 2019

When the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..

Read more
Aug 21, 2019

Want to learn how to build an FPV rig? This guide will walk you through your first FPV freestyle build. These parts were hand-picked to balance cost and maximize performance. The TBS Source One is a popular frame for it's low cost, high quality carbon fiber. It's easy to work with and provides more than enough space for your electronics. We've got a 32bit 4-in-1 ESC to bring you the smoothest flights..

Read more