Räsvelg 3"

By NekTahiti on Jan 13, 2017

6  476  1

I loved building my Räsvelg but it is a tight fit. It will be upgraded to a Kiss AIO as soon as those are available. Straightdforward build with regular parts. Also thinking of switching the antenna to a small linear ufl one. Will update!

EDIT: Switched to the KISS AIO and a linear antenna, down to 154g with no lipo

Photos

Part List

Frame

Räsvelg 3" FPV Frame (3 builds)
Pitchrollyaw.net
$45.00

Flight Controller

KISS CompactCTRL CC All-in-One (40 builds)
Flyduino.net
$117.75

Motors

4 x Tornado T1 1407 3600kV (194 builds)
Pitchrollyaw.net
$63.96

Propellers

Team RaceKraft 3030 3" Quad-Blade Propeller (2 builds)
Pitchrollyaw.net
$2.99

FPV Camera

FOXEER XAT600M 600TVL Mini FPV Camera HS1177 (130 builds)
Pitchrollyaw.net
$39.99

FPV Transmitter

ImmersionRC Tramp HV 600mW 5.8GHz Video Transmitter (US Version) (140 builds)
Store.rotorriot.com
$31.62

Antenna

TBS Unify Pro 5G8 Linear Antenna (84 builds)
Team-blacksheep.com
$6.95

Receiver

FrSky XSR 2.4 GHz 16ch ACCST Receiver with S-BUS and CPPM (28 builds)
Rccrazed.com
$29.99

Batteries

Thunder Power RC TP870-4SA80X
Thunderpowerrc.com
$32.99

Misc Parts

1.8mm 170 Degree Wide Angle Lens (10 builds)
Pirofliprc.com
$6.99
Show stores (7)

Discussion

Sign in to comment

dirtdiver   Jan 16, 2017  

Clean man! And I love the way the Kiss special connector can actually be used for something :P

Guides & Reviews

26 1,240  11
17 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,827  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more