WarHammer

By TheMrJahn on Sep 30, 2019

20  658  0

This build based on a new frame from Catalyst Machineworks SuperSlamNasty - 20mm available stack height. I think it's one of the best frames for 20x20 hardware! Talon F7 Fusion fc and Gigawatt v2 esc, Hypetrain Stingy 2207 2150kv motors - top and reliable hardware for 5/6s freestyle drone. For fpv hardware i chose RunCam Phoenix Oscar Edition cam and TBS Unify PRO32 Nano vtx. As a result - total weight is 287.8 grams!

To get everything work correctly some changes need to be done in bf configurator.

  1. To fix motor four resourses should be remapped:
    Resource MOTOR 6 None
    Resource MOTOR 4 C08
  2. To get voltage from vs pin:
    Go to the mode tab and setup a mode switch for pitmode

Photos

Discussion

Sign in to comment

Guides & Reviews

27 2,070  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more