Martian 7" LR "Voyager"

By corristo25 on Apr 03, 2020

10  273  0

Wached some LR flights YT videos, liked them so much. Decided to build one, partially from parts laying around.
Had old Martian 5" frame, so bought 7" arms, and used my old LittleBee ESC.
Last to do is to print a GoPro mount.


Part List


Realacc Martian IV 7 Inch 300mm Wheelbase 4mm Arm Carbon Fiber FPV Racing Frame Kit (2 builds)

Flight Controller

Holybro Kakute F7 AIO V1.5 Flight Controller (21 builds)


4 x FVT Favourite LittleBee 30A BLHeli_S ESC (3 builds)


4 x Racerstar AirA 2508 1200KV 4-6S Brushless Motor for Long Range X-Class RC Drone FPV Racing MultiRotors (11 builds)


4 x HQProp DP 7X3.5X3 V1S PC Propeller (Set of 4 - Black) (12 builds)

FPV Camera

Caddx Ratel Starlight HDR 1200TVL Micro FPV Camera - Choose Your Color & LensRed / 2.1mm (96 builds)

FPV Transmitter

AKK Race Ranger Smart Audio 200mW/400mW/800mW/1600mW Power Switchable FPV Transmitter w/ SMA Adapter for RC Drone Airplane Long (2 builds)




XILO AXII Long Range 5.8GHz 1.6dBi Gaine Antenna LHCP/RHCP SMA For FPV RC Drone


TBS Crossfire Nano RX - FPV Long Range Drone Receiver (568 builds)


FrSky 2.4G Accst Taranis Q X7 16 Channels Transmitter Remote Controller White Battery and Battery Trays Not Include (205 builds)


Fat Shark Dominator HDO 2 FPV Goggles (8 builds)

3D Printed

Martian Alien GPS + immortalT + vtx mount for Long Range by corristo25
See Site

3D Printed

LED arm foot for racing drone (matek) by corristo25
See Site

HD Camera

GoPro Session (60 builds)


2 x Matek LED X2/5V Motor Mount for 1806 2204 2206 Motor Multicoptersv Blue for RC Drone FPV Racing


Beitian BN-880 Flight Control GPS Module Dual Module Compass With Cable for RC Drone FPV Racing

Misc Parts

JHE42B 110DBI Finder Buzzer Built-in Battery with LED Light for RC Drone F3 F4 F7 Flight Controller (6 builds)

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (129 builds)

Radio Module

TBS Crossfire Micro Transmitter Module (8 builds)

Battery Charger

ISDT Q6 Lite 200W 8A MINI Pocket Battery Balance Charger for 2S-6S Lipo Battery (20 builds)

Battery Charger

SKYRC D100 V2 AC DC Dual Balance Charger Discharger Power Supply (2 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (145 builds)


FPV Racing 8mm Motor Bullet Cap Quick Release RC Wrench Tool Sleeve with Reinforcements 22g for RC Drone (2 builds)


Lowepro QuadGuard BP X3 - Drone Backpack for 4 FPV Quad Racing Drones and 15" Laptop w/Exterior Mounts (Black) (24 builds)


DANIU Heat Resistant Silicone Pad Desk Mat Heat Insulation Maintenance Platform BGA Soldering Repair Station - 5 Styles for Opti


SKYRC Temperature Sensor 0-80℃ For B6 Lipo Battery Charger


DANIU Heavy Duty Soldering Solder Iron Tip Cleaner Steel Wire (2 builds)


Realacc Transmitter Handbag EVA Hard Case for Frsky Q X7 X-Lite Flysky FS-i6 FPV Goggles


XT30 Plug 1S-3S Lipo Battery Upgrade Version Parallel Charging Board for IMAX B6 Balance Charger


XT30 Plug 1S-3S Lipo Battery Upgrade Version Parallel Charging Board for IMAX B6 Balance Charger


Tarot Para Board TL2715 Lipo Parallel Charger Charging Board T Plug pro version
See Site


Tarot Para Board TL2715 Lipo Parallel Charger Charging Board T Plug pro version
See Site


US $32.19 19% OFF|BOSCAM BOS200RC FPV Watch 200RC 5.8GHz 32CH HD 960*240 2
See Site
Show stores (10)


Sign in to comment

Guides & Reviews

27 2,208  29
24 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,856  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more