Moka Mikro revamp

By JTR1 on Oct 02, 2019

9  276  0

After a lot of flight I decided to change the camera.  I wanted a starlight and good camera.  But the original top plate do not allow micro size camera (19mm x 19mm). So I decided to switch the top plate for a printed canopy.  I have start from one found on thingiverse and modify it.

my print : https://www.thingiverse.com/thing:3848162

Photos

Discussion

Sign in to comment

Guides & Reviews

39 3,821  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,674  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more