By headmazta on Oct 07, 2019

11  391  5

I know that YOU and I love purple hence the touch of purple! This is also my first time to use Revolt OSD FC, all I can say is it's really smooth!!! Combined with the soft mounted motors and perfect propellers. OMG! Reaaaaally smooth... I've burnt my first ESC due to wrong wiring because I'm more used to soldering wires than using connectors like it's been years since I last used pins so I needed to buy another ESC after that scary incident. Anyway, here it is! After months of preparation, finally built it in a day.



Part List


Armattan Marmotte 5.5" Frame - Special Edition (3 builds)

Flight Controller

FlightOne RevoltOSD (32 builds)


PYRO32F3-45AMP 4IN1 F3 32BIT BLHELI ESC 4X45A (7 builds)


4 x RCINPOWER GTS-V2 2207PLUS 2207 1860KV (10 builds)


Gemfan 51466x3 Hurricane Durable (4pcs) MCK (38 builds)

FPV Camera

Foxeer Predator Mini V4 1000TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera w/ OSD (1.8mm or 2.5mm) - Choose Your Color (30 builds)

FPV Transmitter

TBS Unify Pro32 HV 5.8GHz Video Transmitter (MMCX) (68 builds)


Foxeer 5.8G Lollipop 3 2.5DBi Omni Antenna RHCP (2pcs) (90 builds)


TBS Crossfire Nano RX - FPV Long Range Drone Receiver (652 builds)


GNB 1100mAh 6S 130C LiPo Battery (2 builds)


FrSky Taranis X9D Plus + Alu Case kaufen | (44 builds)


Fatshark HDO FPV Goggles (116 builds)

HD Camera

GoPro Hero5 Session (196 builds)

Misc Parts

12 PCS Diatone 40A Brushless Motor Wire Extension Plate For RC Drone FPV Racing Multi Rotor (5 builds)

Misc Parts

Armattan Marmotte GoPro Mount with ND Filter slot by headmazta
See Site

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (144 builds)

Radio Module

TBS Crossfire Micro TX V2 (107 builds)

Battery Charger

ISDT SC-608 150W 8A MINI Smart LCD Battery Balance Charger AU Warehouse (9 builds)


TBS Crossfire Immortal T Antenna (18 builds)
Show stores (12)


Sign in to comment

WISCAL   Oct 22, 2019  

Thinking about building my first FligthOne quad. I have this same pyro esc but there's no 5v out and it appears the RevoltOSD requires 5vin. How did you get around this?

headmazta   Oct 24, 2019 

I'm actually making a diagram right now.. I'll just finish it up and then send it later :)

Thomaat   Oct 08, 2019  

Sick build bro

headmazta   Oct 08, 2019 

Thanks, bro! :)

Guides & Reviews

39 3,819  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,673  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more