My Super G+. Fun fact: this is actually the first Super G+ to ever fly; Jordan gave me the prototype frame and I happened to have time to build and maiden it before he did. It worked so well, the first revision was what ended up going to production. Since then I've swapped out some parts, so I've listed the new parts here (unify HV, and hobbywing 60A). I love this quad for carting a gopro around at range. :)
Frame |
Super G Plus
(15 builds)
Project399.com
|
$100.00 |
Flight Controller |
radix fc - brainfpv
(90 builds)
Brainfpv.com
|
$54.99 |
ESCs |
Hobbywing XRotor Micro 60A 6S 4-in-1 BLHeli_32 ESC
(9 builds)
Airbladeuav.com
|
$69.99 |
Motors |
ETHIX Konasty 2407 2200kV Brushless Motor
(6 builds)
Airbladeuav.com
|
$25.99 |
Propellers |
HQProp 7x3.5x3 V1S Propeller (Set of 4)
(2 builds)
Airbladeuav.com
|
$3.99 |
FPV Camera |
RunCam Micro Eagle
(266 builds)
Airbladeuav.com
|
$44.99 |
FPV Transmitter |
TBS Unify Pro 5G8 HV (SMA)
(571 builds)
Getfpv.com
|
$49.99 |
Antenna |
TBS Crossfire Immortal T V2 Antenna
(11 builds)
Team-blacksheep.com
|
$5.95 |
Antenna |
TrueRC Singularity SMA 5.8Ghz Antenna (Long)
(4 builds)
Airbladeuav.com
|
$19.99 |
Receiver |
Team BlackSheep TBS Crossfire Nano ReceiverDefault Title
(6 builds)
Airbladeuav.com
|
$29.99 |
Batteries |
Turnigy High Capacity 5200mAh 4S 12C Lipo Pack w/XT60
(3 builds)
Hobbyking.com
|
$44.05 |
Misc Parts |
TBS M8 GPS Glonass
(3 builds)
Team-blacksheep.com
|
$10.50 |
hi bro, with this setup. how far the maximum cruise range you get & how about the letancy
thank you so much bro for advice & share that, you're right about the OSD hopefully dji will bring that features to the next update. they should have it not everyone would like to use minimal display.
but i have last question bro, let say Im using gps like BN220 on my dji setup. like you said it doesnt show us the navigation, but how about the rescue mode? is it still can be activated. do you have any advice about it
In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..
Read moreWhen the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..
Read more
Love the Frame.
But I'm noticing their website doesn't have the 3D printed mounts for the Cam and Antenna/GPS.
Can you buy those elsewhere or do you need a 3D printer?
You can get the printed antenna mount from airbladeuav.com: https://www.airbladeuav.com/products/airblade-crossfire-immortal-t-antenna-mount?variant=19657188999230 -- it's originally designed by airblade, and he prints and sells them. The GPS mount is a community thing designed by the awesome dude behind nxgraphics.ca. If you know anybody with a printer, it's in this bundle: https://www.thingiverse.com/thing:3238638