Diatone R369 Lite

By Werdna FPV on Dec 25, 2019

13  551  2

Purpose: Mid-weight 4S ripper
Batteries: Tattu 650mah 4S, Turnigy 650mah 4S, Turnigy 700mah 3S
Dry weight: 125g
Weight with Tattu 650mah 4S: 195g

This is my first 3 inch build and I didn't build it with the intention of making the fastest 3 inch quad (Singapore has no space for that anyway) but something relatively fast with good efficiency. Oh can I just say what an amazing camera the Monster Micro Pro is :D leagues better than my old Runcam Swift Micros. Colours are a lot more vibrant and the resolution is improved too. Anyway, I flashed it to Betaflight 4.1.1 and it flies not bad on stock PIDs.

Here's a test flight on 3S, haven't done 4S yet but will get down to it soon!


Part List


Diatone GT R369 Frame Kit For 3inch 6S Crazy Racing Limited Edition FPV Racing RC Drone Model Part DIY Accessories

Flight Controller

MAMBA F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC (97 builds)


4 x EMAX 1306 RS1306 Version 2 RS1306B 2700KV 4000KV Brushless Motor 3-4S For RC Drone Multi Rotor (16 builds)


HQProp T3X3X3 PC Propeller (Set of 4) (37 builds)

FPV Camera

Foxeer Monster Micro Pro 1.8mm 16:9 1200TVL PAL/NTSC WDR Low Latency FPV Camera (24 builds)

FPV Transmitter

Eachine NANO VTX 5.8GHz 48CH 25/100/200/400mW Switchable FPV Transmitter Support OSD/Pitmode/IRC Tramp (49 builds)


2pcs Foxeer Lollipop 85.5mm 5.8G 2.3dBi RHCP UFL Super Mini FPV Antenna Red/Black For RC Drone (79 builds)


FrSky XM+ SBUS 2.4GHz Mini Receiver (33 builds)


TATTU 650mAh 4S1P 75C 14.8V Lipo Battery Pack with XT30 plug (45 builds)


FrSky ACCST Taranis Q X7 Transmitter 2.4G 16CH Mode 2 White Black International Version for RC Drone (220 builds)


Skyzone SKY03O Oled /SKY03S 5.8GHz 48CH Diversity FPV Goggles Support OSD DVR HDMI With Head Tracker Fan LED For RC Racing Drone (31 builds)


Diatone M3x6 Inner Hexagon Screw Pack 20pcs For RC Drone FPV Racing Multi Rotor (4 builds)
Show stores (5)


Sign in to comment

acromode   Jan 05, 2020  

how is the noise level?

Werdna FPV   Jan 16, 2020 

Not too bad. I added a big ass 1000uf capacitor that cleans up noise well on 4S. You can decide for yourself here


Guides & Reviews

59 4,797  49
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,689  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more