Razor-XM+ Ultralight 3" DVR
Frame: Custom Design - cut @ CNC-Madness
Canopy: Custom Design SLS printed Nylon/Carbon
Motors: RC-in-power 1204
FC: Nameless AIO412
Camera: Runcam Nano-2
Vtx: Diamond Vtx DVR
Props: HQ 3x2
Battery: GNB 3s 450mah
Flight Controller |
NameLessRC F4 AIO 12A
(2 builds)
Optimum-racing.ch
|
$39.90 |
Motors |
4 x RCINPOWER GTS 1204 5000KV 3-4S Brushless Motor for 2-3 Inch RC Drone FPV Racing
(3 builds)
Taco-rc.com
|
$51.96 |
FPV Camera |
RunCam Nano2
(184 builds)
Pyrodrone.com
|
$19.99 |
FPV Transmitter |
Happymodel Diamond 5.8Ghz 40CH 25/100/200mW Switchable VTX FPV Transmitter with DVR Smartaudio Ready 3.3-5.5V
(19 builds)
Taco-rc.com
|
$14.99 |
Antenna |
Lumenier AXII Stubby 5.8GHz Antenna (RHCP)
(232 builds)
Getfpv.com
|
$14.99 |
Receiver |
Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH
(1149 builds)
Taco-rc.com
|
$12.99 |
Looks awesome. Love that you painted the outside edges light blue. AUW is right where it needs to be too so I bet it will be a great performer. What is your method and choice of paint for painting frames like that? I can never seem to get it right....
I was recently recommended 'Sharpie Paint Pens' ('oil based' - 'Fine point' tip) and they are amazing, way better than using model paints and brushes.
I did 2 coats with a few hours drying in between, but even after 1 coat the colour is super solid and vibrant (even on a black base)
Used scalpal to clean up edges on frame where not quite perfect.
you can buy the pens individually on ebay, make sure its the 'oil based' version and fine tip if you want to do detailed stuff
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Thats an awesome build. Any chance you'll release the frame and canopy files? Ive been trying to decide on a frame and having a place for everything with that xm+ cutout makes this by far my first pick if it was available anywhere.