on 3s, 450 to 650mah. on 4s, 450mah. This bumper was difficult to build there are easier ways. Starting with the betafpv frames (85x and 95x).

I've never taken apart a session 5. total is 90g without battery.  never weighed just the frame.  might be able to find the specs on betafpv site.

i ordered a button. For now it's this:

hook up screen
plug in battery
start recording
remove screen
fly
land
attach screen
stop recording
unplug battery

I hope your button arrives soon ;)

its 106.3g without battery.  I'm trying to lose about 8g.  450ma is maybe 41g.  650 is about 60

For a begginer like me, how hard is it to fly this type of drone?
I must say that this drone is amazing!

it's not easy but it's different for everyone.  some find it easy to learn other not as much.  you could fly it without the gopro stuff and it wont get damaged much because its foam.  however you do have to build it.  also need a radio, goggles, batteries, charger, soldering iron, etc.

sorry i was misunderstood .
i allready have a FPV drone
geprc cinepro 4K​
but i fly less than a month
and i am not happy with image of the camera.
i am really interesting in a drone like yours because of its small white​
however i wants to know how hard is it to fly this model ?

also tell me please..
how did you strip the gopro and kept it so organize ?​
i saw a french guy on youtube that strip gopro but his strip look like a mass
too bad you didn't post a tutorial on how you strip it
thank you

I see. If you can fly one already it's not hard. However I am trying to make it lighter. Right now it's a little heavy and the batteries get hot. I followed this tutorial

. It's almost exactly the same for a hero 6. Then I created a 3d printed mount to hold it. It's fragile though. Maybe join this new group for tips: https://www.facebook.com/groups/1786964794772748/

what about gopro hero 7 ' is it the same ?

and thank you :-)

ive seen people do it. I think it overheats. but it doesn't work as well as the 6 with Reelsteady GO.

thank you!
last question please !
during the process of the striping, what is the risk to to make the gopro unusable ?
and how much tech knowledge do you need to have in order to do this ?

you can just copy what is in the youtube video to take it apart.  the electronics are tiny so there is a decent chance of ruining something.  you should not do this if you are not prepared to throw away the cost of a used hero 6

thank you so much !

because I haven't flown it yet

Ok...Promise to give ya a like when I see it bud. ;)
Would like to compare footage to the one I just built that uses the FIreFly Q6...
https://rotorbuilds.com/build/20195

I test flew it. Couple short flights cuz batteries are 3 years old. Working on footage. I use reelsteady though. I think you're going to like it. How much does that Firefly weigh?

40.7 grams - it will do 4k but a 24fps, 2.5k 30fps, 1440p 30fps, and 1080p 60fps.

ok that's light. I am at 106g without battery but.. it's a gopro.

Added today's test video.

Freaking awesome bud...keep up the great work! You have my like :) - We you flying all acro or using horizon mode?

ha thanks! I fly acro with really turned down rates. If I use horizon I don't like that 'bounce' when it locks level. I could get used to it, but then it'd probably screw me up for acro.

outdoors when it's calm. No choice it needs to be light as possible.