Mockup

Dragonfly 5" Source One

By Anco on Oct 30, 2019

0  8  0

Part List

Frame

DFR Source One 5" Frame V3
Drone-fpv-racer.com
$32.61

Flight Controller

MAMBA F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC (77 builds)
Banggood.com
$44.99

Motors

4 x Mamba 2207 1750 / 2650KV 4-6S moteur brushless filetage pour drone 2019 GTR569 RC FPV Racing
Fr.banggood.com
See Site

Propellers

HQProp DP5X4.3X3 V1S - PC - (2x CW + 2xCCW) (375 builds)
Drone-fpv-racer.com
$3.26

Propellers

HQProp DP5X4.3X3 V1S - PC - (2x CW + 2xCCW) (375 builds)
Drone-fpv-racer.com
$3.26

FPV Camera

RunCam Swift 2 1/3 CCD 600TVL PAL FOV 130/150/165 Degree 2.5mm/2.3mm/2.1mm Micro FPV Camera OSD MIC (415 builds)
Banggood.com
$30.99

FPV Transmitter

TBS Unify Pro 5.8 Ghz HV - Race - SMA (542 builds)
Drone-fpv-racer.com
$27.15

Antenna

Antennes TBS Triumph PRO (SMA STUB) - RHCP
Drone-fpv-racer.com
$24.97

Receiver

Récepteur FrSky R-XSR (SBUS/PPM 16/8 voies) (EU-LBT)
Drone-fpv-racer.com
$23.88

Batteries

3 x URUAV 22.2V 1050mAh 95C 6S Prise Lipo Batterie XT60 pour FPV Racing Drone
Fr.banggood.com
See Site

HD Camera

Foxeer Box 2 4K 30Fps HD Filtre ND à 155 ° FOVD SuperVison FPV Caméra Sport Action Cam Support APP Micro HDMI pour RC Racing
Fr.banggood.com
See Site

Hardware

Entretoise alu M3 pour Stack 4.5mm+6mm - 10pcs
Drone-fpv-racer.com
$4.80

Hardware

Suleve M3AS14 10Pcs M3 30mm En Alliage D'aluminium Standoff Entretoise Colonne Ronde MultiColor Surface Lisse
Fr.banggood.com
See Site

Hardware

Suleve M3AN12 10Pcs M3 moleté Thumb Nut w / collier vis entretoise rondelle alliage d'aluminium multicolore
Fr.banggood.com
See Site

Misc Parts

Vifly Finder 5V Super fort Traqueur de Vibrateur Plus de 100dB Batterie intégrée pour contrôleur de vol RC Drone
Fr.banggood.com
See Site

Battery Charger

iMAX B6 80W 6A Lipo Batterie Chargeur de balance avec adaptateur d'alimentation
Fr.banggood.com
See Site
Show stores (3)

Discussion

Sign in to comment

Guides & Reviews

24 1,806  27
20 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,756  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more