This was a standard BabyHawk R Pro 2.5" but a tree jumped into my flight path so had to rebuild it.................even better, faster, stronger, etc.
Frame |
Emax Babyhawk Race Pro 2.5 Spare Parts Bottom Plate Pack & Nonslip Pad & Battery Strap
Banggood.com
|
$17.01 |
Flight Controller |
EMAX Mini Magnum V2 6S Tower System 20x20 Stack/Combo - MMCX
(11 builds)
Racedayquads.com
|
$99.99 |
Motors |
4 x NEW TOA LITE 1107 | kareareadrone
Kareareadrone.com
|
See Site |
Propellers |
2 Pairs Emax AVAN Rush 2.5 Inch 3 Blade Propeller For Babyhawk R RC Drone FPV Racing Multi Rotor
(19 builds)
Banggood.com
|
$3.17 |
FPV Camera |
RunCam Swift 2 Micro - 2.3mm Lens
(282 builds)
Getfpv.com
|
$26.99 |
FPV Transmitter |
EMAX Babyhawk Drones & Parts for - RaceDayQuads
(4 builds)
Racedayquads.com
|
$3.99 |
Receiver |
FRSKY XM+ Plus 16CH Receiver
(1149 builds)
Phaserfpv.com.au
|
See Site |
Very impressive design and execution! The canopy lines work so well with the prop it looks natural. So cool :)
Yeah that's epic. Crazy good design. Is that color effect the filament or a paint job? Do you upload or sell any of your canopy designs?
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Was the body 3D printed or was it custom made from an aftermarket shop? Or was this handmade by you?
The body was designed, 3d printed, and painted by myself.