Wealcom to my nightmare
I could blather on
Flight Controller |
MAMBA F405 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
(55 builds)
Banggood.com
|
$42.99 |
Propellers |
DAL 5x4.6 - 3 Blade, Crystal Red Cyclone Propeller - T5046C (Set of 4)
(391 builds)
Getfpv.com
|
$1.99 |
FPV Camera |
Caddx Ratel 1/1.8'' Starlight HDR OSD 1200TVL NTSC/PAL 16:9/4:3 Switchable 1.66mm/2.1mm Lens FPV camera For RC Drone
Banggood.com
|
$28.48 |
I see that chopsticks frame that you're building up, I like the front motor on the bottom for visibility... I do wonder how it will perform as a landing gear, but I have faith in your ability to land :)
There are pics in my mockups.
The z frame is 2 production ccchhhheeeepppp china frames the idea is to mount the battery smack in the center of efort and mount the gyro as close to c of motion as possible probably mount it vertical just behind the batteryand lengthen the rear arms or shorten the front to fine tune.
Ok, so the big grey frame that you have the "extra props" on is my favorite, I have been dreaming about moulding a custom CF frame very similar to that one. Where did it come from, do you have a link I can use to get one, or at least check it out? Maybe take some pics of tha one for me, l really want to check it out. The canopy's that you have are looking awesome (the three that are similar, with the round porthole at the back, and the "sleeves"). I'm interested in that 'Z' frame, the one that's 2 "y" shaped pieces. Is that a production frame, or a 1 off? Keep crushing it man, your work keeps me fueled!
Ok, so the big grey frame that you have the "extra props" on is my favorite, I have been dreaming about moulding a custom CF frame very similar to that one. Where did it come from, do you have a link I can use to get one, or at least check it out? Maybe take some pics of tha one for me, l really want to check it out. The canopy's that you have are looking awesome (the three that are similar, with the round porthole at the back, and the "sleeves"). I'm interested in that 'Z' frame, the one that's 2 "y" shaped pieces. Is that a production frame, or a 1 off? Keep crushing it man, your work keeps me fueled!
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
awesome, man i really dig all your creations.
I am truly inspired in the qwerd world now....by the way, the caddix ratel is honestly, a bad ass little camera for the price. I wish we could meet up an have a flying session together.
keep up the great work bud.👾
Thanks bloke . if you are ever in WEST AUSTRALIA ,look me up . i have accomidation ,basic but clean.
Stay free '
Same goes to any other quaders out there.
West Au is a lot like California US , but without ,people, polution or sadly pot .
Where i live is remote and hot ,Youal have been warned.
Cheers
NO....pot, damm man bet its hard to grow to unless you have a secret lair🤐
thanks for the hook bud, its won place out of the states i want to expolore an hang.
I hope to win on the scatch offs here someday, if its a big payout. I'm booking a chariot.
keep thrashing man..
hi guys you be okay with me asking for some tips and advice on a project im doing? im new to the community
I can help you if you need assistance bud!!