TBS Digital

By kevintmckay on Nov 11, 2019

11 11 3

wanted to build a simple solid platform around the new DJI digital air unit, I am pleased with the results.
dry 350
with 4s 520
the handling and balance are very nice

Photos

Part List

Frame	Team-blacksheep.com (105 builds) Team-blacksheep.com	See Site
Flight Controller	CLRacing F4S V1.6 AIO 30x30 Flight Controller (144 builds) Racedayquads.com	$74.99
ESCs	RacerStar Rev35 35A 3-6S 30x30 4in1 ESC (112 builds) Racedayquads.com	$30.99
Motors	4 x RDQ BADASS 2205 2450Kv Motor (36 builds) Racedayquads.com	$39.96
Propellers	DAL 5x4.6 - 3 Blade, Black Cyclone Propeller - T5046C (Set of 4) (391 builds) Getfpv.com	$1.99
FPV Camera	Caddx DJI Digital HD FPV Camera (164 builds) Getfpv.com	$64.99
FPV Transmitter	DJI Digital HD FPV Air Unit Module (121 builds) Getfpv.com	$119.99
Antenna	DJI Digital FPV Air Unit Elbow MMCX Antenna 2 Pack (45 builds) Racedayquads.com	$14.99
Receiver	Lemon RX DSM2 Satellite Receiver - Spektrum Compatible (9 builds) Amazon.com	$10.99
Batteries	4S Drone Batteries for - RaceDayQuads (88 builds) Racedayquads.com	$26.49
Misc Parts	Lumenier QAV-R 2 DJI Antenna Mount (2 builds) Getfpv.com	$4.99

Show stores (4)

Like Copy Part List Follow kevintmckay

Discussion

Adm009 Mar 31, 2020

link to the camera mounts? thanks!

IsaacFPV Mar 07, 2020

what props are you using? the link you listed is to a set of 3 blades

Impavidus Nov 12, 2019

Would you happen to have a few more pics? At least a side pic. I too have this TBS frame and I would like to see how everthing is mounted.

kevintmckay Nov 16, 2019

sure, the esc I used was to big so had to top mount the air unit, works fine but after I burn it will use something smaller. the handling on this thing is beutufuly and without a go pro its nimble but also pretty bullet proof

Impavidus Nov 19, 2019

Great build. I'm going to do the same thing with the antennas. I'll mount the esc with leads facing left or right and utilize https://www.thingiverse.com/thing:3937660 for the air unit.