Badger DJI Edition

By FeilongFPV on Nov 14, 2019

22  1,500  5

Badger DJI Edition.
Thank you Armattan for making this frame and putting great features on it.

Enjoyed making this build :)

Photos

Discussion

Sign in to comment

harley   Feb 05, 2020  

Very nice build! Curious if you managed to fit a capacitor to the esc board? I've started a build with the same frame and stack and struggling to work out how to fit in a capacitor.

FeilongFPV   Feb 10, 2020 

Yes it fits, I had to wire it and put in between the FC and the DJI unit

AirbusA320   Jan 13, 2020  

Beautiful drone, congratulations! This frame together with the dji system is going to be my first ever build. just a couple of noob question, what's the name of the cable guards that you have on the arms to protect the cables that go from the esc to the motors??

Is the dji "antenna mounts -holes in the frame" working ok? I see that some people using the non-dji badger frame uses some 3d printed antenna holder, do you think those would be more effective/protective??

thanks and enjoy your great drone!!

FeilongFPV   Jan 20, 2020 

Thanks! Sorry for the delayed response. I don't check this site often.

  1. Just some cable Braided Sleeving. You can find it on amazon
  2. The holes are fine, crashed couple times and no problem. Those are well though and they hold the antenas from falling out. Range also works great.
AirbusA320   Jan 21, 2020 

thanks for your help!!!

Guides & Reviews

39 4,111  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,878  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more