tpu tyro air

By kwadkenstine on Nov 29, 2019

10  217  3

hi.
Remix the tyro 129 .
Add air.
Honestly if i were starting out again and i had about 2K to spend .
No , if i lost all my fpv kit , this is what i would do,
buy a tyro 129 kit , a ton of 15004s and a dji air kit (goggles ,transmitter camera , the lot).
Add a cheepy charger or 2 and your done.
It will all work . it can all be plug and play FC wiring ,I sollllldered. and you get a gps unit as well as the tyro vtx and camera.
Tuning tip , i found it to cruse like a car on a bumpy road, tried a lot of stuff . then set d min to 0 . like driving on a smooth road with sloppy suspension and worn shocks. played arround with the sliders a bit and am happy with cruise and it has NO PROP WASH,cool motors.
I should also add , not using rpm filtering with this one the tyro esc is only bl s and not a J esc so no upgrade.

Photos

Discussion

Sign in to comment

kwadkenstine   Dec 07, 2019  

Uploading a vid of this rig tooling about my place, should be done in about 6 days . 1 take 1500 4s, will link when done if i can figure it

Jodie Froster   Nov 29, 2019  
1

So where did that aluminum part (that you added to the frame) come from?

kwadkenstine   Nov 29, 2019 

made it

Guides & Reviews

55 4,369  44
28 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,651  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more