HYPERLOW RS+ 1.2 TRUE X

By richrd on Dec 10, 2019

18  639  4

New updates to the HYPERLOW RS+ included 6mm arms and new bottom brace.

6s Freestyle build.

Photos

Part List

Frame

HYPERLOW RS+ (11 builds)
Hyperlowframes.com
$70.00

Flight Controller

PYRODRONE F4 OSD V2 with VTX PIT mode (21 builds)
Pyrodrone.com
$32.99

ESCs

PYRO32F3-45AMP "V2" 4IN1 F3 32BIT BLHELI ESC 4X45A (11 builds)
Pyrodrone.com
$49.99

Motors

4 x Hyperlite 2306.5-1722KV HV EDITION (2 builds)
Pyrodrone.com
$87.96

FPV Camera

Foxeer Falkor Micro 1200TVL 1.8mm FPV Camera (66 builds)
Getfpv.com
$36.99

FPV Transmitter

TBS Unify Pro 5G8 V3 (SMA) (174 builds)
Getfpv.com
$39.99

Antenna

TrueRC Singularity Long 5.8GHz (SMA) (RHCP) (9 builds)
Hobbyrc.co.uk
$20.31

Receiver

TBS Crossfire Nano RX FPV LONG RANGE DRONE RECEIVER (756 builds)
Pyrodrone.com
$24.95
Show stores (4)

Discussion

Sign in to comment

ChrisCro82   Dec 14, 2019  
1

Hey Richard.
Do you plan on introducing a frame that will be able to accomodate the ByteFrost or DJI Air Unit ?
And what's the difference between the RS+ and the RS+ 1.2 ?

richrd   Dec 15, 2019 

hi chris yes got two frames upcoming that should fit both. the just announced caddx dji unit should fit existing frames. the 1.2 designation just refers to the version update (listed on the product page). current version has 6mm arms and new bottom brace

BigLou   Dec 11, 2019  
1

nice clean build! do you tune these begote going out?

richrd   Dec 11, 2019 

thank you! somewhat.... the beta defaults are rock solid these days so there is not much to be done. 4.1.1 on this was super smooth with rpm filtering.

Guides & Reviews

55 4,362  44
28 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,651  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more