This is my second cinewhoop. I loved my squirt V2 with DJI fpv, but had to sell it to my friend, so now it is time to another.
I designed the camera cage to get the ducts out of view. Also designed the antenna mount to have the antennas clean.
Stl's for the cam cage and antenna mount: https://www.thingiverse.com/thing:3947701
Printed all parts of Sky blue TPU 98A, it just looks gorgeous!
Ducts I found from thingiverse: https://www.thingiverse.com/thing:3829997
Gopro mount: https://www.thingiverse.com/thing:3869800
I added some neoprene seal tape around the ducts to have some more protection.
Frame |
Iflight MegaBee HD 3" FPV CineWhoop Frame for DJI FPV
Drone-fpv-racer.com
|
See Site |
Flight Controller |
CL Racing F4 - Mini Flight Controller
(10 builds)
Armattanquads.com
|
$46.00 |
ESCs |
HOLYBRO Tekko32 F3 4in1 45A mini ESC - 20x20mm
(3 builds)
Pyrodrone.com
|
$56.00 |
Motors |
4 x Moteur Brushless Emax RS1606 - 3300Kv
(3 builds)
Drone-fpv-racer.com
|
$56.00 |
Propellers |
GEMFAN Squirt Props 75mm
(6 builds)
Drone-fpv-racer.com
|
See Site |
FPV Camera |
Unité aérienne DJI FPV
(293 builds)
Drone-fpv-racer.com
|
See Site |
Receiver |
TBS Crossfire Nano RX (SE)
(412 builds)
Drone-fpv-racer.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Really nice job on this build. I just bought a used MegaBee that I am rebuidings with modified ducts designed for the GemFan props. Otherwise, it is all stock but will get a Crossfire receiver soon. I like the color you chose too. That caught my eye quickly. 👍
thank you very much! 😊
megabee is a good frame, just original ducts are crap 😊👍
When I bought my MegaBee, it had TPU ducts on it but they are way too flexible and the props would scrape against them. The ducts I ordered are still PLA but reinforced so I hope that they hold up better than the original ones. Here is a link to them.
https://www.ebay.com/itm/iFlight-MegaBee-V2-Venturi-Coanda-HD-Duct-Set-Cinewhoop-Quad-Upgrade-FPV-USA/114067633355?ssPageName=STRK%3AMEBIDX%3AIT&var=414445118212&_trksid=p2060353.m1438.l2649