A kissed BOT!!!!!
Frame |
BOTAFX 5" - BQE.io
(3 builds)
Bqe.io
|
$86.66 |
Flight Controller |
KISS FC V2 - 32bit Flight Controller
(62 builds)
Getfpv.com
|
$69.99 |
ESCs |
4 x KISS 2-5S 25A (40A limit) 32bit ESC
(6 builds)
Getfpv.com
|
$107.96 |
Motors |
4 x Hypetrain Cricket 2306.6 2550KV Motor
(5 builds)
Rotorriot.com
|
$103.80 |
FPV Camera |
Caddx Ratel Starlight 1200TVL HDR Low-Light Micro FPV Camera
(114 builds)
Getfpv.com
|
$29.99 |
FPV Transmitter |
TBS Unify Pro32 HV 5.8GHz Video Transmitter (MMCX)
(119 builds)
Getfpv.com
|
See Site |
Receiver |
TBS Crossfire Nano Rx
(1499 builds)
Getfpv.com
|
See Site |
Power Distribution |
MATEKSYS FCHUB-6S PDB
(96 builds)
Getfpv.com
|
$10.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What are the screws in the gopro mount for (the "side-to-side" ones)?
they GoPro mount is a two piece...
I confess, I was being intentionally obtuse. They seem like a fair bit of unnecesiary weight, and it looks like you have made a lot of decisions to save weight. Just confusing (if you have to get out your nut driver to take it off, why not just take off the whole thing?). You would get a double weight savings if you switched to a 1 piece, because the extra plastic used to accomodate the metal hardware would also go away. I Have struggled with the mounting and dismounting of said plastic gopro mounts a little. I designed several, and printed a few from other ppl's designs. The magic moment was when I realised that I would get the angle and height I wanted in the design if I simply put it on, and took it off without the gopro in it. Now none of mine can be installed or removed with the session in them, but they are ideal in every other way.