Been listening to a bunch of Pink Guy lately.

-I wanted a top mount battery, TP3 type kwad that was stupid cheap to maintain.
Lots of things going on here.
-Half a dozen 3d prints from unrelated projects found on thingiverse. Used scaling in cura to get them the sizes i needed.
-Running F3 performance edition 4.1.1 with 48khz Jesc and overclocked to 112mhz.
-Solid pin PH2.0 harness.
-Frame is printed with layers of PLA and TPU. 3 thin layers of TPU with 2 larger layers of PLA. Like a Big Mac.
-Since TPU and PLA have the same melting temperature, they will fuse together if you print slightly hot, with no cooling fan.
-Durability testing (daughter throwing frames against hard wood floors), shows that the TPU layered frames break less than straight PLA.
-59 grams dry.
-9500kv motors are on a 80% throttle limit/scale.
-3:30 minutes of freestyle flying on 450 2s.
-Been running 1104s, 3" props on 5a escs for months now. Haven't killed any of my 3 boards.

I love this hobby.
Thank you Dave_C
Thank you Thunkar