Mark25 - Stryker

By sekthree on Jan 22, 2017

1  218  0

I was the winner in Flynoceros' first puzzle challenge (, and received a Canis M5 V2 as a prize for completing/solving the puzzle. Upon receiving and seeing Bardwell's review on the M4, I knew this would definitely be an advanced build. The only downside was i really wasn't prepared to do a NEW build, so I worked with what I had... spare parts. I had enough parts in my bin for a new build with the exception of ESC's, and with the release of the new EMAX 20a Bullets I decided to go with these.. aside from that I also decided to buy a new VTX as the one i was GOING to use (TS5832) was RPSMA. so i purchased the new DYS 200mw vtx for only $13! The 3D printed TPU top frame cover has a slight hump and so I'm not able to add an HD camera. I could most likely just leave it off, but I like how it looked. SO, with winter upon us (kinda, lol), I decided to make this build my night & snow kwad! I coated ALL electronics in liquid electric tape as best as i could and just adds to the stealth look, and with the OWL plus it'll be good on those gloomy days, or dusk since the sun goes down sooner now. I'm ok with running an outdated F1 Naze32 board since i won't be doing any extreme stunts or full fledged racing. Once this was put together I immediately fell in Love with how it turned out! :) watch out night, here i come.


Part List


Canis M5 V2 (Flyno Carbon) Limited Run

Flight Controller

Betaflight F7 Pro Flight Controller w/Dual Gyro OSD Blackbox Barometer Current Sensor (22 builds)




4 x Cobra 2204 2300kv w/bullets


HQ Triple Prop 5x4x3 Black (2 Full Sets) 4CW 4CCW (4 builds)

FPV Camera

RunCam Owl Plus (8 builds)

FPV Transmitter

DYS Mi200 25mw-200 switchable VTX SMA (10 builds)


Lumenier AXII 5.8GHz Antenna RHCP (2pcs)


FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry) (14 builds)

Power Distribution

Matek Mini Power HUB with BEC 5V & 12V


FatShark Dominator V3 FPV Goggles (57 builds)

Misc Parts

uxcell® 15Pcs DC 5V 85dB Industrial Active Electronic Alarm Buzzer (2 builds)

Misc Parts

10PCS 1000UF 1000mfd 25V Electrolytic Capacitor 105c 105 degrees

Video Receiver

FatShark Dominator 5.8GHz Module
Show stores (8)


Sign in to comment

Guides & Reviews

55 4,375  44
28 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,652  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more